|By Marketwired .||
|July 22, 2014 06:42 PM EDT||
LOS ANGELES, CA--(Marketwired - July 22, 2014) - Nitroheat, a wholly owned subsidiary of AUTRIS (OTCQB: AUTR) is expanding into Portland, Oregon with bigger and better facilities and strategic growth in the Pacific Northwest region.
Nitroheat announces the relocation to a 10,000 square foot manufacturing warehouse located in Wilsonville, OR. The facility will accommodate an expanding inventory and order fulfillment. The new larger facility will feature state of the art technology that will increase the amount of orders that can be built and shipped per day.
Nitroheat has a variety of applications in a multitude of industries. In the automotive industry, use heated nitrogen for all your spray-painting requirements to save on paint material, increase productivity, improve transfer efficiency, shorten drying times and minimize VOCs. In the automotive and aeronautical industry you can maintain constant temperatures and tire pressure. Improve economy and increase tire life. Remember compressed air leaks 40% faster than Nitrogen. No moisture in the aircraft tires means no freezing at high altitudes. In aircraft spray painting and fuel tank safety, save on material and time with heated nitrogen for spray painting. Improve fuel tank safety with nitrogen top up to eliminate the presence of oxygen and the possibility of combustion.
Nitrogen can be used to minimize and even remove oxygen from silos for moisture free environment and pest control. Nitrogen is used in a number of medical applications in both liquid and gas formats. Nitrogen can be used to produce synthetic ammonia without using fossil fuels.
Nitrogen heat generators are not just used in the automotive and aeronautical industries. It has been used in wine production and bottling as well. Generating your own nitrogen eliminates the hassles of supplied cylinders, dewars or bulk nitrogen. A nitrogen generator dispels any concerns about lines icing up, running low, or running out of nitrogen. Costly downtime, tank rental fees, Haz Mat fees, delivery fuel surcharges, price increases, evaporation concerns, and multi-year lease agreements will be eliminated. Producing your own nitrogen eliminates reliance on outside vendors, allowing your winery to be more self-sufficient. The Wine Nitrogen Generators typically have a 9-18 month payback, and an operating life of at least 10 years.
Pure nitrogen gas fracking uses nitrogen almost exclusively, with only negligible amount of water present. In this case, the nitrogen is maintained in a gaseous state, meaning it is low density and compressible.
There are a few featured clients all along the West Coast; Riverside, CA, Los Angeles, CA, Las Vegas NV, and Vancouver, BC. Nitroheat is expanding into Portland, Oregon with bigger and better facilities to provide for the expanding heated nitrogen market.
Innovative & Efficient Technologies: Science and engineering dominate Autris's approach as its engineers seek innovative solutions and products. Autris's flagship product NITROHEAT™ uses the power of nitrogen in an innovative process to alleviate a variety of common painting issues in industrial applications.
NITROHEAT™ is a manufacturer and distributor of nitrogen generators and compressed gas heaters. This unique solution is currently supplied into the automotive and industrial spray painting markets. Even though NITROHEAT™'s initial focus is in the spray painting of vehicle and industrial applications, there are a variety of other uses for this system in the following areas: Food production and packaging, shielding gases in the industrial and aeronautical sector, fire retardants, wine production and bottling, shielding gas and aluminum extrusion.
In the painting segment, the benefits derived from the utilization of the NITROHEAT™ system are: improved paint transfer efficiency, faster drying / curing time and a higher finish quality.
In the industrial sectors, the Nitrogen generators are used as an alternative to compressed "bottled / tanked" nitrogen. The NITROHEAT™ Nitrogen generators are able to produce "NITROGEN ON DEMAND".
The NITROHEAT™ compressed gas heaters are also used in a variety of industries requiring hot air". NITROHEAT™'s unique thermal process controllers are able to precisely supply compressed air or nitrogen at very specific temperatures.
All manufacturing and assembly is conducted out of our Gardena facility in California.
Neither the SEC or the TSX Venture Exchange nor its Regulation Services Provider (as that term is defined in the policies of the TSX Venture Exchange) accepts responsibility for the adequacy or accuracy of this news release.
Cautionary Note Regarding Forward-Looking Statements
Certain statements contained in this news release, including any information as to our strategy, projects, plans or future financial or operating performance and other statements that express management's expectations or estimates of future performance, may constitute forward-looking information (collectively "forward-looking information") within the meaning of Canadian securities laws. Forward-looking information may be identified by terminology such as "may", "will", "could", "should", "expect", "plan", "anticipate", "believe", "intend", "estimate", "projects", "predict", "potential", "continue" or other similar expressions concerning matters that are not historical facts and include, but are not limited to, resource estimates, capital and operating expenditures, economic conditions, availability of sufficient financing, receipt of approvals, satisfaction of closing conditions and any and all other timing, development, operational, financial, economic, legal, regulatory and/or political factors that may influence future events or conditions. Such forward-looking statements are based on a number of material factors and assumptions, including, but not limited to, access to capital markets and other sources of financing and associated cost of funds, final receipt of any required approvals, sufficient working capital for development and operations, access to adequate services and supplies, availability of markets for products, commodity prices, foreign currency exchange rates, interest rates, availability of a qualified work force, availability of manufacturing equipment, no material changes to the tax and regulatory regime, the ultimate ability to execute business plans on economically favourable terms and those material factors and assumptions disclosed in other public filings of Jourdan Resources.
While we consider these assumptions to be reasonable based on information currently available to us, they may prove to be incorrect. Actual results may vary from such forward-looking information for a variety of reasons, including but not limited to, risks and uncertainties disclosed in other public Jourdan Resources filings, changes in general economic, market and business conditions, competition for, among other things, capital and skilled personnel, and other unforeseen events or circumstances, that may cause the actual financial results, performance or achievements of the Company to be materially different from estimated future results, performance or achievements expressed or implied by the forward-looking statements. Copies of the Company's public filings under applicable Canadian securities laws are available at www.sedar.com. The Company further cautions that information contained on, or accessible through, this website is current only as of the date of filing such information and may be superseded by subsequent events or filings. Other than as required by law, Jourdan Resources does not intend, and undertakes no obligation, to update any forward looking information to reflect, among other things, new information or future events.
For additional information, contact: Email contact
President and CEO
Tel: (310) 698 9693
Fax: (866) 437 1405
"We have a tagline - "Power in the API Economy." What that means is everything that is built in applications and connected applications is done through APIs," explained Roberto Medrano, Executive Vice President at Akana, in this SYS-CON.tv interview at 16th Cloud Expo, held June 9-11, 2015, at the Javits Center in New York City.
Jul. 6, 2015 08:45 AM EDT Reads: 1,642
Jul. 6, 2015 08:45 AM EDT Reads: 1,752
Jul. 6, 2015 08:15 AM EDT Reads: 1,504
Jul. 6, 2015 08:00 AM EDT Reads: 358
Jul. 6, 2015 08:00 AM EDT Reads: 1,545
Jul. 6, 2015 07:30 AM EDT Reads: 1,545
Jul. 6, 2015 07:15 AM EDT Reads: 1,592
Jul. 6, 2015 05:30 AM EDT Reads: 2,237
Jul. 6, 2015 05:00 AM EDT Reads: 1,556
Jul. 6, 2015 03:00 AM EDT Reads: 2,447
Jul. 6, 2015 02:45 AM EDT Reads: 2,765
Jul. 5, 2015 08:00 PM EDT Reads: 1,672
Jul. 5, 2015 07:15 PM EDT Reads: 1,893
Jul. 5, 2015 06:00 PM EDT Reads: 2,245
Jul. 5, 2015 06:00 PM EDT Reads: 1,692