|By Marketwired .||
|July 29, 2014 07:10 AM EDT||
VANCOUVER, BRITISH COLUMBIA -- (Marketwired) -- 07/29/14 -- Asanko Gold Inc. ("Asanko" or the "Company") (TSX: AKG)(NYSE MKT: AKG) is pleased to announce positive results from the metallurgical test work program conducted on the Dynamite Hill deposit. Dynamite Hill is a recently discovered near surface deposit located 7 km from the processing facility, set to begin construction next month, at the Company's flagship Asanko Gold Mine ("AGM" or the "Project") in Ghana.
The metallurgical test work program, conducted by Metallurgy Pty Ltd in Western Australia, was undertaken to assess the gravity and cyanide leach amenability of the oxide, transitional and fresh material from the Dynamite Hill deposit, as well as the comminution characteristics.
The results have confirmed that the material from the deposit presents consistent and similar leach kinetics to the other deposits which make-up the Project. It is expected that the Dynamite Hill material will blend well with the ore from the other four Phase 1 Project pits; Nkran, Adubiaso, Abore and Asuadai and confirms that the standard gravity and Carbon-in-Leach processing facility designed for Phase 1 is appropriate for treating material from Dynamite Hill.
Results of metallurgical testing show that the gold recovery averages between 93.2 and 96.2% across the various mineral types with an average of 95%. Gravity gold separation test work indicates that approximately 50% of the gold is expected to be recovered in the gravity circuit. Comminution testing indicates that the Bond work index varies between 10 kWh/t for softer oxide ore and 16 kWh/t for the harder fresh material, which is a similar range as the other deposits at the Project.
A maiden Mineral Resource Estimate ("MRE") for Dynamite Hill is currently being compiled by the Company and is expected to be published in September 2014, along with a definitive mine plan which will be included as part of the overall Definitive Project Plan for Phase 1. As the Dynamite Hill mineralisation occurs at or near surface, minimal pre-stripping requirements are anticipated.
Following completion of the MRE and definitive mine plan, a modification to the existing Mine Operating Permit will be sought prior to commencement of mining activity at Dynamite Hill, which is anticipated in Q3 2015.
About Asanko Gold Inc.
Asanko's vision is to become a mid-tier gold mining company that maximizes value for all its stakeholders. Asanko's flagship project is the fully financed and permitted, multi-million ounce Asanko Gold Mine Project located in Ghana, West Africa. The mine will be developed in phases. Phase 1 has been approved and construction will commence in Q3 2014, with first gold is targeted in Q1 2016.
Asanko is managed by highly skilled and successful technical, operational and financial professionals. The Company is strongly committed to the highest standards for environmental management, social responsibility, and health and safety for its employees and neighbouring communities.
Forward-Looking and other Cautionary Information
This release includes certain statements that may be deemed "forward-looking statements". All statements in this release, other than statements of historical facts, that address estimated resource quantities, grades and contained metals, possible future mining, exploration and development activities, are forward-looking statements. Although the Company believes the forward-looking statements are based on reasonable assumptions, such statements should not be in any way construed as guarantees of future performance and actual results or developments may differ materially from those in the forward-looking statements. Factors that could cause actual results to differ materially from those in forward-looking statements include market prices for metals, the conclusions of detailed feasibility and technical analyses, lower than expected grades and quantities of resources, mining rates and recovery rates and the lack of availability of necessary capital, which may not be available to the Company on terms acceptable to it or at all. The Company is subject to the specific risks inherent in the mining business as well as general economic and business conditions. For more information on the Company, Investors should review the Company's annual Form 20-F filing with the United States Securities Commission and its home jurisdiction filings that are available at www.sedar.com.
Neither Toronto Stock Exchange nor the Investment Industry Regulatory Organization of Canada accepts responsibility for the adequacy or accuracy of this release.
Cautionary Note to US Investors Regarding Mineral Reporting Standards:
Asanko has prepared its disclosure in accordance with the requirements of securities laws in effect in Canada, which differ from the requirements of US securities laws. Terms relating to mineral resources in this press release are defined in accordance with National Instrument 43-101 - Standards of Disclosure for Mineral Projects under the guidelines set out in the Canadian Institute of Mining, Metallurgy, and Petroleum Standards on Mineral Resources and Mineral Reserves. The Securities and Exchange Commission (the "SEC") permits mining companies, in their filings with the SEC, to disclose only those mineral deposits that a company can economically and legally extract or produce. Asanko uses certain terms, such as, "measured mineral resources", "indicated mineral resources", "inferred mineral resources" and "probable mineral reserves", that the SEC does not recognize (these terms may be used in this press release and are included in the public filings of Asanko which have been filed with securities commissions or similar authorities in Canada).
When it comes to cloud computing, the ability to turn massive amounts of compute cores on and off on demand sounds attractive to IT staff, who need to manage peaks and valleys in user activity. With cloud bursting, the majority of the data can stay on premises while tapping into compute from public cloud providers, reducing risk and minimizing need to move large files. In his session at 18th Cloud Expo, Scott Jeschonek, Director of Product Management at Avere Systems, discussed the IT and busin...
Dec. 8, 2016 01:00 AM EST Reads: 3,952
In his general session at 19th Cloud Expo, Manish Dixit, VP of Product and Engineering at Dice, discussed how Dice leverages data insights and tools to help both tech professionals and recruiters better understand how skills relate to each other and which skills are in high demand using interactive visualizations and salary indicator tools to maximize earning potential. Manish Dixit is VP of Product and Engineering at Dice. As the leader of the Product, Engineering and Data Sciences team at D...
Dec. 8, 2016 12:30 AM EST Reads: 1,101
The Internet of Things (IoT) promises to simplify and streamline our lives by automating routine tasks that distract us from our goals. This promise is based on the ubiquitous deployment of smart, connected devices that link everything from industrial control systems to automobiles to refrigerators. Unfortunately, comparatively few of the devices currently deployed have been developed with an eye toward security, and as the DDoS attacks of late October 2016 have demonstrated, this oversight can ...
Dec. 8, 2016 12:15 AM EST Reads: 1,323
"We're a cybersecurity firm that specializes in engineering security solutions both at the software and hardware level. Security cannot be an after-the-fact afterthought, which is what it's become," stated Richard Blech, Chief Executive Officer at Secure Channels, in this SYS-CON.tv interview at @ThingsExpo, held November 1-3, 2016, at the Santa Clara Convention Center in Santa Clara, CA.
Dec. 7, 2016 11:45 PM EST Reads: 991
What happens when the different parts of a vehicle become smarter than the vehicle itself? As we move toward the era of smart everything, hundreds of entities in a vehicle that communicate with each other, the vehicle and external systems create a need for identity orchestration so that all entities work as a conglomerate. Much like an orchestra without a conductor, without the ability to secure, control, and connect the link between a vehicle’s head unit, devices, and systems and to manage the ...
Dec. 7, 2016 10:30 PM EST Reads: 847
"Once customers get a year into their IoT deployments, they start to realize that they may have been shortsighted in the ways they built out their deployment and the key thing I see a lot of people looking at is - how can I take equipment data, pull it back in an IoT solution and show it in a dashboard," stated Dave McCarthy, Director of Products at Bsquare Corporation, in this SYS-CON.tv interview at @ThingsExpo, held November 1-3, 2016, at the Santa Clara Convention Center in Santa Clara, CA.
Dec. 7, 2016 10:00 PM EST Reads: 1,192
In his session at Cloud Expo, Robert Cohen, an economist and senior fellow at the Economic Strategy Institute, provideed economic scenarios that describe how the rapid adoption of software-defined everything including cloud services, SDDC and open networking will change GDP, industry growth, productivity and jobs. This session also included a drill down for several industries such as finance, social media, cloud service providers and pharmaceuticals.
Dec. 7, 2016 09:15 PM EST Reads: 368
In IT, we sometimes coin terms for things before we know exactly what they are and how they’ll be used. The resulting terms may capture a common set of aspirations and goals – as “cloud” did broadly for on-demand, self-service, and flexible computing. But such a term can also lump together diverse and even competing practices, technologies, and priorities to the point where important distinctions are glossed over and lost.
Dec. 7, 2016 08:45 PM EST Reads: 1,633
Data is the fuel that drives the machine learning algorithmic engines and ultimately provides the business value. In his session at Cloud Expo, Ed Featherston, a director and senior enterprise architect at Collaborative Consulting, discussed the key considerations around quality, volume, timeliness, and pedigree that must be dealt with in order to properly fuel that engine.
Dec. 7, 2016 08:15 PM EST Reads: 2,211
All clouds are not equal. To succeed in a DevOps context, organizations should plan to develop/deploy apps across a choice of on-premise and public clouds simultaneously depending on the business needs. This is where the concept of the Lean Cloud comes in - resting on the idea that you often need to relocate your app modules over their life cycles for both innovation and operational efficiency in the cloud. In his session at @DevOpsSummit at19th Cloud Expo, Valentin (Val) Bercovici, CTO of Soli...
Dec. 7, 2016 07:15 PM EST Reads: 1,803
Enterprise IT has been in the era of Hybrid Cloud for some time now. But it seems most conversations about Hybrid are focused on integrating AWS, Microsoft Azure, or Google ECM into existing on-premises systems. Where is all the Private Cloud? What do technology providers need to do to make their offerings more compelling? How should enterprise IT executives and buyers define their focus, needs, and roadmap, and communicate that clearly to the providers?
Dec. 7, 2016 07:15 PM EST Reads: 412
SYS-CON Events announced today that Dataloop.IO, an innovator in cloud IT-monitoring whose products help organizations save time and money, has been named “Bronze Sponsor” of SYS-CON's 20th International Cloud Expo®, which will take place on June 6-8, 2017, at the Javits Center in New York City, NY. Dataloop.IO is an emerging software company on the cutting edge of major IT-infrastructure trends including cloud computing and microservices. The company, founded in the UK but now based in San Fran...
Dec. 7, 2016 07:00 PM EST Reads: 486
Join Impiger for their featured webinar: ‘Cloud Computing: A Roadmap to Modern Software Delivery’ on November 10, 2016, at 12:00 pm CST. Very few companies have not experienced some impact to their IT delivery due to the evolution of cloud computing. This webinar is not about deciding whether you should entertain moving some or all of your IT to the cloud, but rather, a detailed look under the hood to help IT professionals understand how cloud adoption has evolved and what trends will impact th...
Dec. 7, 2016 06:00 PM EST Reads: 2,669
In his session at 19th Cloud Expo, Claude Remillard, Principal Program Manager in Developer Division at Microsoft, contrasted how his team used config as code and immutable patterns for continuous delivery of microservices and apps to the cloud. He showed how the immutable patterns helps developers do away with most of the complexity of config as code-enabling scenarios such as rollback, zero downtime upgrades with far greater simplicity. He also demoed building immutable pipelines in the cloud ...
Dec. 7, 2016 06:00 PM EST Reads: 1,874
"We are the public cloud providers. We are currently providing 50% of the resources they need for doing e-commerce business in China and we are hosting about 60% of mobile gaming in China," explained Yi Zheng, CPO and VP of Engineering at CDS Global Cloud, in this SYS-CON.tv interview at 19th Cloud Expo, held November 1-3, 2016, at the Santa Clara Convention Center in Santa Clara, CA.
Dec. 7, 2016 05:45 PM EST Reads: 1,107