|By Marketwired .||
|August 6, 2014 02:13 AM EDT||
STOCKHOLM, SWEDEN -- (Marketwired) -- 08/06/14 -- Lundin Petroleum AB (TSX:LUP)(OMX:LUPE) (Lundin Petroleum) is pleased to announce that it has completed the first well in its 2014 Malaysian drilling campaign with the successful drilling and testing of Tembakau-2 appraisal well in Block PM307, offshore Malaysia.
Tembakau-2 was drilled by the jackup rig West Prospero to a depth of 1,450 metres in 68 metres water depth. The well targeted stacked gas reservoirs in Miocene aged sands in a large, low-relief, structure discovered by Lundin Petroleum's Tembakau-1 well in late 2012.
Tembakau-2 is 3.7 kilometres to the south of the discovery well and penetrated 22 metres of gross gas sands in four sand intervals between 900 metres and 1300 metres subsea. The main two reservoirs penetrated were fully cored and the well was comprehensively logged.
The reservoir deliverability was measured through production testing. The "I20" sand produced at stabilised flow rate of 15.8 million standard cubic feet per day of gas over a 8 hour period on 64/64" choke and the "I10" sand produced at stabilised flow rate of 15.9 million standard cubic feet per day of gas over a 8 hour period on 72/64" choke.
Each perforated interval was 3 metres. The gas produced is dry with approximately 0.5% CO2. Multiple samples were obtained for further laboratory analysis. The data gathered will be analysed and integrated with 3D seismic information to update the current gross contingent resource estimate of gas and to provide reservoir information for conceptual development studies.
Ashley Heppenstall, President and CEO, commented; "The appraisal drilling results from Tembakau are positive. We are incorporating the results of the well into an updated resource estimate. We will now move forward in reviewing conceptual development options and I am hopeful that this will lead to another commercial development project in Malaysia."
The well has been plugged and abandoned and the West Prospero rig has moved to the Bertam oil field well head platform location, also in PM307, to commence development drilling.
Lundin Petroleum holds a 75 percent interest in PM307 through its subsidiary Lundin Malaysia BV. Lundin Malaysia BV's partner is PETRONAS Carigali Sdn. Bhd. with 25 percent interest. Lundin Malaysia BV operates seven blocks in Malaysia, namely PM307, PM308A, PM308B, PM319, SB303and SB307/308.
Lundin Petroleum is a Swedish independent oil and gas exploration and production company with a well balanced portfolio of world-class assets primarily located in Europe and South East Asia. The Company is listed at the NASDAQ OMX, Stockholm (ticker "LUPE") and at the Toronto Stock Exchange (TSX) (Ticker "LUP"). Lundin Petroleum has proven and probable reserves of 194 million barrels of oil equivalent (MMboe).
This information has been made public in accordance with the Securities Market Act (SFS 2007:528) and/or the Financial Instruments Trading Act (SFS 1991:980).
Certain statements made and information contained herein constitute "forward-looking information" (within the meaning of applicable securities legislation). Such statements and information (together, "forward-looking statements") relate to future events, including the Company's future performance, business prospects or opportunities. Forward-looking statements include, but are not limited to, statements with respect to estimates of reserves and/or resources, future production levels, future capital expenditures and their allocation to exploration and development activities, future drilling and other exploration and development activities. Ultimate recovery of reserves or resources are based on forecasts of future results, estimates of amounts not yet determinable and assumptions of management.
All statements other than statements of historical fact may be forward-looking statements. Statements concerning proven and probable reserves and resource estimates may also be deemed to constitute forward-looking statements and reflect conclusions that are based on certain assumptions that the reserves and resources can be economically exploited. Any statements that express or involve discussions with respect to predictions, expectations, beliefs, plans, projections, objectives, assumptions or future events or performance (often, but not always, using words or phrases such as "seek", "anticipate", "plan", "continue", "estimate", "expect", "may", "will", "project", "predict", "potential", "targeting", "intend", "could", "might", "should", "believe" and similar expressions) are not statements of historical fact and may be "forward-looking statements". Forward-looking statements involve known and unknown risks, uncertainties and other factors that may cause actual results or events to differ materially from those anticipated in such forward-looking statements. No assurance can be given that these expectations and assumptions will prove to be correct and such forward-looking statements should not be relied upon. These statements speak only as on the date of the information and the Company does not intend, and does not assume any obligation, to update these forward-looking statements, except as required by applicable laws. These forward-looking statements involve risks and uncertainties relating to, among other things, operational risks (including exploration and development risks), productions costs, availability of drilling equipment, reliance on key personnel, reserve estimates, health, safety and environmental issues, legal risks and regulatory changes, competition, geopolitical risk, and financial risks. These risks and uncertainties are described in more detail under the heading "Risks and Risk Management" and elsewhere in the Company's annual report. Readers are cautioned that the foregoing list of risk factors should not be construed as exhaustive. Actual results may differ materially from those expressed or implied by such forward-looking statements. Forward-looking statements are expressly qualified by this cautionary statement.
Reserves and Resources
Unless otherwise stated, Lundin Petroleum's reserve and resource estimates are as at 31 December 2013, and have been prepared and audited in accordance with National Instrument 51-101 Standards of Disclosure for Oil and Gas Activities ("NI 51-101") and the Canadian Oil and Gas Evaluation Handbook ("COGE Handbook"). Unless otherwise stated, all reserves estimates contained herein are the aggregate of "Proved Reserves" and "Probable Reserves", together also known as "2P Reserves". For further information on reserve and resource classifications, see "Reserves, Resources and Production" in the Company's annual report.
Contingent Resources are those quantities of petroleum estimated, as of a given date, to be potentially recoverable from known accumulations using established technology or technology under development, but are not currently considered to be commercially recoverable due to one or more contingencies. Contingencies may include factors such as economic, legal, environmental, political and regulatory matters or a lack of markets. There is no certainty that it will be commercially viable for the Company to produce any portion of the Contingent Resources. Unless otherwise stated, all contingent resource estimates contained herein are the best estimate ("2C") contingent resources.
Prospective Resources are those quantities of petroleum estimated, as of a given date, to be potentially recoverable from undiscovered accumulations by application of future development projects. Prospective Resources have both a chance of discovery and a chance of development. There is no certainty that any portion of the Prospective Resources will be discovered. If discovered, there is no certainty that it will be commercially viable to produce any portion of the Prospective Resources. Unless otherwise stated, all Prospective Resource estimates contained herein are reflecting a P50 Prospective Resource estimate. Risked Prospective Resources reported herein are partially risked. They have been risked for chance of discovery, but have not been risked for chance of development.
BOEs may be misleading, particularly if used in isolation. A BOE conversion ratio of 6 Mcf : 1 Bbl is based on an energy equivalency conversion method primarily applicable at the burner tip and does not represent a value equivalency at the wellhead.
SYS-CON Events announced today that Pulzze Systems will exhibit at the 19th International Cloud Expo, which will take place on November 1–3, 2016, at the Santa Clara Convention Center in Santa Clara, CA. Pulzze Systems, Inc. provides infrastructure products for the Internet of Things to enable any connected device and system to carry out matched operations without programming. For more information, visit http://www.pulzzesystems.com.
Oct. 22, 2016 05:00 AM EDT Reads: 2,465
Without lifecycle traceability and visibility across the tool chain, stakeholders from Planning-to-Ops have limited insight and answers to who, what, when, why and how across the DevOps lifecycle. This impacts the ability to deliver high quality software at the needed velocity to drive positive business outcomes. In his general session at @DevOpsSummit at 19th Cloud Expo, Eric Robertson, General Manager at CollabNet, will discuss how customers are able to achieve a level of transparency that e...
Oct. 22, 2016 05:00 AM EDT Reads: 654
In the next forty months – just over three years – businesses will undergo extraordinary changes. The exponential growth of digitization and machine learning will see a step function change in how businesses create value, satisfy customers, and outperform their competition. In the next forty months companies will take the actions that will see them get to the next level of the game called Capitalism. Or they won’t – game over. The winners of today and tomorrow think differently, follow different...
Oct. 22, 2016 04:30 AM EDT Reads: 795
One of biggest questions about Big Data is “How do we harness all that information for business use quickly and effectively?” Geographic Information Systems (GIS) or spatial technology is about more than making maps, but adding critical context and meaning to data of all types, coming from all different channels – even sensors. In his session at @ThingsExpo, William (Bill) Meehan, director of utility solutions for Esri, will take a closer look at the current state of spatial technology and ar...
Oct. 22, 2016 03:30 AM EDT Reads: 1,662
The Open Connectivity Foundation (OCF), sponsor of the IoTivity open source project, and AllSeen Alliance, which provides the AllJoyn® open source IoT framework, today announced that the two organizations’ boards have approved a merger under the OCF name and bylaws. This merger will advance interoperability between connected devices from both groups, enabling the full operating potential of IoT and representing a significant step towards a connected ecosystem.
Oct. 22, 2016 02:45 AM EDT Reads: 1,148
SYS-CON Events announced today that Interface Masters Technologies, a leader in Network Visibility and Uptime Solutions, will exhibit at the 19th International Cloud Expo, which will take place on November 1–3, 2016, at the Santa Clara Convention Center in Santa Clara, CA. Interface Masters Technologies is a leading vendor in the network monitoring and high speed networking markets. Based in the heart of Silicon Valley, Interface Masters' expertise lies in Gigabit, 10 Gigabit and 40 Gigabit Eth...
Oct. 22, 2016 02:45 AM EDT Reads: 3,285
Without lifecycle traceability and visibility across the tool chain, stakeholders from Planning-to-Ops have limited insight and answers to who, what, when, why and how across the DevOps lifecycle. This impacts the ability to deliver high quality software at the needed velocity to drive positive business outcomes. In his session at @DevOpsSummit 19th Cloud Expo, Eric Robertson, General Manager at CollabNet, will show how customers are able to achieve a level of transparency that enables everyon...
Oct. 22, 2016 02:45 AM EDT Reads: 1,243
As software becomes more and more complex, we, as software developers, have been splitting up our code into smaller and smaller components. This is also true for the environment in which we run our code: going from bare metal, to VMs to the modern-day Cloud Native world of containers, schedulers and microservices. While we have figured out how to run containerized applications in the cloud using schedulers, we've yet to come up with a good solution to bridge the gap between getting your conta...
Oct. 22, 2016 02:00 AM EDT Reads: 1,390
DevOps theory promotes a culture of continuous improvement built on collaboration, empowerment, systems thinking, and feedback loops. But how do you collaborate effectively across the traditional silos? How can you make decisions without system-wide visibility? How can you see the whole system when it is spread across teams and locations? How do you close feedback loops across teams and activities delivering complex multi-tier, cloud, container, serverless, and/or API-based services?
Oct. 22, 2016 01:45 AM EDT Reads: 942
SYS-CON Media announced today that @WebRTCSummit Blog, the largest WebRTC resource in the world, has been launched. @WebRTCSummit Blog offers top articles, news stories, and blog posts from the world's well-known experts and guarantees better exposure for its authors than any other publication. @WebRTCSummit Blog can be bookmarked ▸ Here @WebRTCSummit conference site can be bookmarked ▸ Here
Oct. 22, 2016 01:30 AM EDT Reads: 9,608
SYS-CON Events announced today that Streamlyzer will exhibit at the 19th International Cloud Expo, which will take place on November 1–3, 2016, at the Santa Clara Convention Center in Santa Clara, CA. Streamlyzer is a powerful analytics for video streaming service that enables video streaming providers to monitor and analyze QoE (Quality-of-Experience) from end-user devices in real time.
Oct. 22, 2016 01:15 AM EDT Reads: 890
You have great SaaS business app ideas. You want to turn your idea quickly into a functional and engaging proof of concept. You need to be able to modify it to meet customers' needs, and you need to deliver a complete and secure SaaS application. How could you achieve all the above and yet avoid unforeseen IT requirements that add unnecessary cost and complexity? You also want your app to be responsive in any device at any time. In his session at 19th Cloud Expo, Mark Allen, General Manager of...
Oct. 22, 2016 01:15 AM EDT Reads: 808
@ThingsExpo has been named the Top 5 Most Influential Internet of Things Brand by Onalytica in the ‘The Internet of Things Landscape 2015: Top 100 Individuals and Brands.' Onalytica analyzed Twitter conversations around the #IoT debate to uncover the most influential brands and individuals driving the conversation. Onalytica captured data from 56,224 users. The PageRank based methodology they use to extract influencers on a particular topic (tweets mentioning #InternetofThings or #IoT in this ...
Oct. 22, 2016 01:00 AM EDT Reads: 8,150
SYS-CON Events announced today that Super Micro Computer, Inc., a global leader in Embedded and IoT solutions, will exhibit at SYS-CON's 20th International Cloud Expo®, which will take place on June 7-9, 2017, at the Javits Center in New York City, NY. Supermicro (NASDAQ: SMCI), the leading innovator in high-performance, high-efficiency server technology, is a premier provider of advanced server Building Block Solutions® for Data Center, Cloud Computing, Enterprise IT, Hadoop/Big Data, HPC and ...
Oct. 22, 2016 12:30 AM EDT Reads: 3,492
Today every business relies on software to drive the innovation necessary for a competitive edge in the Application Economy. This is why collaboration between development and operations, or DevOps, has become IT’s number one priority. Whether you are in Dev or Ops, understanding how to implement a DevOps strategy can deliver faster development cycles, improved software quality, reduced deployment times and overall better experiences for your customers.
Oct. 22, 2016 12:30 AM EDT Reads: 521