Welcome!

News Feed Item

Pure Gold Announces 2014 Drill Program at the Madsen Gold Project

9,000 Metre Drill Program Planned for Resource Expansion and Target Generation

VANCOUVER, BRITISH COLUMBIA -- (Marketwired) -- 08/07/14 -- Pure Gold Mining Inc. (TSX VENTURE: PGM) ("Pure Gold" or the "Company") is pleased to announce the launch of a 9,000 metre drill program directed at key exploration targets at its 100% owned Madsen Gold Project in the prolific Red Lake gold district of northwest Ontario. The program is expected to commence in mid-August, and is designed to test and expand the current mineral resource, while concurrently testing high-grade, 8 Zone-style mineralization targets developed through ongoing consolidation and evaluation of the large historic database.

"We are excited to launch our 2014 drill program as we begin to test targets developed through our 'proof of concept' exploration model," stated Darin Labrenz, President & CEO of Pure Gold. "Initial drilling is designed to increase the mineral resource and will test near surface targets along the 12-km Madsen Trend. Drilling will expand to test highly prospective targets generated from early exploration activity with a goal of discovering new zones of high-grade mineralization along the 10 km-long ultramafic contact."

Pure Gold's $4.0 million program combines 9,000 metres of exploration drilling, a geological Footprint Modelling program, a 1,643 line-kilometre helicopter-borne geophysics survey, structural mapping, and a robust geochemical soil and rock sampling program designed to expand and delineate targets along the 12 km-long Madsen unconformity and the 10 km-long ultramafic contact within the Madsen property.

The program will be focused on near-surface step out drilling around the high-grade mineralization in the Madsen Mine Trend, as well as exploration drilling at the McVeigh Ramp, Fork Zone, Junction, Point and other high priority targets across the property. Pure Gold drilling will occur on patented mineral claims easily accessed from the extensive infrastructure network.

DETAILS OF THE TARGETS TO BE DRILL TESTED:

McVeigh Ramp Target:

The McVeigh Zone is a zone of highly strained, moderately to strongly silicified and biotite altered pillow basalts and minor sulphidic sediments, located approximately 750 metres southwest of the Madsen shaft. Typically gold occurs within three stacked lenses of silicified and altered basalt with two to five percent pyrite and lesser pyrrhotite. The McVeigh Ramp has been historically explored and developed in the top two levels of the mine, but potential exists to significantly expand the resource to depth. Pure Gold will target mineralization on the southern edge of the McVeigh Ramp, below the 2nd level with the goal of improving the confidence of, and expanding the mineral resource. Historic drilling in this area has returned 5.6 metres grading 26.4 g/t gold approximately 150 metres below surface from drill hole 4M-224, and 2.9 metres grading 9.0 g/t gold from hole 2M-349 located approximately 100 metres below surface.(1)

Fork Zone Target:

The Fork Zone target is located approximately 1,300 metres south of the Madsen shaft, and approximately 500 metres south of and along strike of the McVeigh Ramp Target. The Fork Zone was initially discovered in 2003 when drilling targeted and intersected a highly altered and deformed basalt and ultramafic contact which suggested the presence of a folded ultramafic nose. Mineralization in the Fork Zone has been interpreted by past operators to form a shallow, open, southeast plunge, and occurs as both replacement style and vein-hosted mineralization associated with the hanging wall contact of the mafic-ultramafic rock units.

Recent re-logging of Fork Zone drill holes and interpretation by Pure Gold suggests that at least two mineralization trends are defined within the Fork Zone, with a shallow flat-lying mineralized horizon intersected by a potentially higher-angle, structurally controlled high-grade vein system. Previous shallow drilling in the Fork Zone has returned 17.3 g/t gold over 10.3 metres from RUM-08-49 and 6.7 metres grading 13.4 g/t gold from hole RUM-08-52, with recent re-sampling of RUM-08-52 returning 5.8 metres grading 21.5 g/t gold(2) (see Table 1). Potential exists at the Fork Zone to define a high-grade mineralized system analogous to 8 Zone mineralization along the mafic - ultramafic contact.

Pure Gold drilling will target both low angle and high angle mineralization in the Fork Zone utilizing oriented core in order to test prospective horizons, and better define structural control on high-grade mineralization with the goal of potentially defining a new mineral resource for the target area.

Junction Target:

The Junction target is located approximately 1,800 metres south of the Madsen shaft, and approximately 500 metres east of the Fork Zone target. The target lies on strike of and is interpreted to be the southern extension of the historic Austin Zone. The target has been intersected by drill hole ST-10-33 which returned intense alteration in the interpreted extension of the Austin Zone, and returned 7.0 g/t gold over 2.0 metres.(2)

Recent mapping by Pure Gold on the property has focused on the unconformity contact between the Balmer Assemblage mafic volcanics, gabbro and ultramafic rocks, and the overlying Confederation Assemblage felsic volcanic rocks, with the objective of mapping in detail the rock types, alteration, geologic contacts and to explain why mineralization is focused in particular zones along the important contact. Mineralization along the unconformity coincides with increased width of biotite-garnet alteration, often in sinistral steps or jogs along the structure.

The Junction target is characterized by both a flexure in the unconformity and by increased widths of recently mapped biotite-garnet alteration. Pure Gold will target the area with drilling designed to intersect the unconformity and the altered zone on the Balmer Assemblage side of the contact. The target has historically been poorly explored, and provides an opportunity to define and extend Austin Zone mineralization one kilometer south of the Madsen Mine development.

Point Target:

The Point Target is located approximately 1,300 metres northeast of the Madsen Shaft. The target area was mined historically from the 10 level and lower, and is characterized by a westerly displacement in the Austin Zone. Recent surface mapping in the area has identified a thickened zone of biotite-garnet alteration associated with a sinistral jog in the unconformity which corresponds with historic mining of the Austin Zone to depth.

Pure Gold will target the prospective, near surface alteration associated with structural deformation with the goal of identifying mineralization similar to the Austin Zone mined at depth below 10 level.

Russet South Target - 8 Zone Up Dip:

The Russet South Target is located approximately 1,400 metres west of the Madsen Shaft, and approximately 1,600 metres up-dip of the 8 Zone resource. The target lies on the western flank of the Russet ultramafic contact and was explored historically prior to consolidation of the property. The target area exhibits strong biotite and silicified alteration in conjunction with deformation parallel to the Madsen unconformity. A second easterly trending brittle - ductile deformation zone, known as the Trans-Russet shear, has been identified in the target area and is parallel to the trend of 8 Zone mineralization at depth.

Historic work at the Russet South target defined five zones of gold bearing mineralization, the most important of which being the Main Zone and Zone 3. The Main Zone is characterized by pyrite, pyrrhotite and native gold associated with potassic alteration. Historic drilling in the area includes 2.2 metres grading 13.20 g/t gold from hole 35, 4.0 metres grading 14.40 g/t gold from hole UBT-88-48 and 0.8 metres grading 78.38 g/t gold from hole UBT-88-44.(1)

Zone 3 is characterized by altered volcanics, commonly silicified and mineralized by pyrite, pyrrhotite and visible gold. This zone appears to be oriented east west, parallel to the Trans-Russet shear and to the 8 Zone at depth. Historic drilling in the area includes 0.7 metres grading 63.77 g/t gold from hole 87, 13.4 metres grading 4.32 g/t gold from hole 68-14, and 1.1 metres grading 10.11 g/t gold from hole 68-8.(1)

Mineralization at Russet South has been defined by shallow drilling on the west side of Russet Lake and on the footwall side of the ultramafic contact zone. This mineralization may represent the up-dip expression of 8 Zone mineralization intersected at depth within the Madsen Mine. Pure Gold is currently conducting a focused mapping program over the Russet South target area, including a detailed soil and rock chip sampling program with the goal of drill testing the Russet South target area in the oncoming fall and winter drill program.

Geological "Footprint Modelling":

Pure Gold continues to build a deposit Footprint Model with an objective of defining structural controls and alteration vectors ("footprints") associated with gold mineralization using ultra-trace geochemistry, magnetic susceptibility, and Terraspec (ASD).

Pure Gold geologists have re-logged three historic drill holes completed by previous operators in 2008 and 2010 targeting the Apple, Fork and Starratt Zones. Concurrent with the re-logging of historic drill core and modeling, geologists are sampling mineralized zones for gold analysis as a check sampling exercise. Gold assays have been received from an additional three drill holes, with significant assay results reported below:



                Table 1 - Significant Check Assay Results(3)

----------------------------------------------------------------------------
Hole ID             From (m)      To (m)  Length (m)    Au (g/t)        Zone
----------------------------------------------------------------------------
AP-09-08              325.55      327.55         2.0        7.44       Apple
----------------------------------------------------------------------------
RUM-08-52               73.4        79.2         5.8        21.5        Fork
----------------------------------------------------------------------------
ST-10-32                 705         708         3.0       11.12    Starratt
----------------------------------------------------------------------------

ABOUT THE MADSEN GOLD PROJECT

Pure Gold recently consolidated its position in the Red Lake district with the acquisitions of the Madsen Gold property and the adjacent Newman-Madsen property (see news releases dated March 4, 2014 and June 25, 2014). Together, these properties make up a 50 square kilometre land package of contiguous, patented ground, collectively known as the Madsen Gold Project. Pure Gold now holds the third largest land package in the Red Lake region.

The property is host to two past-producing mines; existing mine infrastructure including an operational headframe, a 1,275 metre-deep shaft, and a 500 tonne per day mill; an Indicated mineral resource of 928,000 ounces gold (3.24 million tonnes grading 8.93 g/t gold) and an Inferred mineral resource of 297,000 ounces gold (0.79 million tonnes grading 11.74 g/t gold)(4); and, multiple highly prospective exploration targets in a geological setting analogous to other modern high-grade discoveries in the Red Lake district.

A new interpretation of the role of folded ultramafic contacts and structural controls have resulted in multiple recent discoveries in the Red Lake district, including Goldcorp's High Grade Zone at the Red Lake Mine Complex, the Bruce Channel system at the Cochenour Mine, and the F2 Gold System at Rubicon's Phoenix Mine. The environment and mineralization at Madsen's 8 Zone is similar to other recent high grade discoveries in the district. Recent resampling of historic drilling at the 8 Zone returned 38.26 g/t gold over 7.5 metres (see news release dated July 7, 2014). Pure Gold believes the opportunity exists to apply modern exploration science and a new understanding of the district to achieve similar success along the ultramafic contact at the Madsen Gold Project.

At Madsen, the 10 km-long ultramafic contact is highly prospective for additional high-grade discoveries, and numerous recent discoveries along this contact have only been partially advanced. Pure Gold is pursuing a strategy of exploring for additional near surface high-grade mineralization along the 12 km-long Madsen Mine trend and the 10 km-long ultramafic contact.

(1) Historic drill hole results listed in the McVeigh Ramp and Russet South target areas were completed prior to the implementation of National Instrument 43-101. A full discussion and cautionary language regarding historic sampling practices can be found in the NI 43-101 Technical Report entitled "Technical Report for the Madsen Gold Project Red Lake, Ontario, Canada," prepared by SRK Consulting (Canada) Inc. dated effective February 18, 2014.

(2) See the National Instrument 43-101 technical report entitled "Technical Report for the Madsen Gold Project Red Lake, Ontario, Canada," prepared by SRK Consulting (Canada) Inc. dated effective February 18, 2014.

(3) Assay composites were calculated using uncut assays and may include internal dilution. Composites are reported as drilled widths and interpreted to vary between 70% to 85% of true widths.

QA/QC AND CORE SAMPLING PROTOCOLS: Check samples were submitted to ALS Minerals in Thunder Bay, Ontario for sample preparation by crushing to 70% less than 2mm, rotary split off 1kg, and pulverize the split to better than 85% passing 75 microns. Sample pulps are shipped to the ALS assay laboratory in North Vancouver, B.C. for gold analysis with a 30 gram fire assay and AAS finish (code Au-AA23). Samples returning greater than 5 g/t Au are re-assayed with a gravimetric finish (code GRA21). Mineralized zones with visible gold are re-analyzed by a 1kg screen fire assay with screen to 100 microns. A duplicate 30g fire assay is conducted on the screen undersize while assaying of entire oversize fraction (code Au-SCR21). Control samples (accredited standards and blanks) were inserted on a regular basis. Results were monitored on receipt of assays by Gary Lustig, MSc, P.Geo, an independent consultant to Pure Gold and a Qualified Person as defined by National Instrument 43-101.

(4) See the National Instrument 43-101 technical report entitled "Technical Report for the Madsen Gold Project Red Lake, Ontario, Canada," prepared by SRK Consulting (Canada) Inc. dated effective February 18, 2014. Mineral Resources are not Mineral Reserves and do not have demonstrated economic viability.

Qualified Persons

Darren O'Brien, P. Geo., Vice President, Exploration for the Company, is the designated Qualified Person for this news release within the meaning of National Instrument 43-101 ("NI 43-101") and has reviewed and verified that the technical information contained herein is accurate and approves of the written disclosure of same.

ABOUT PURE GOLD

Our mandate is pure and simple. To dream big. To colour outside the lines. To use smart science and creativity to unlock the next multi-million-ounce gold discovery at the Madsen Gold Project in Red Lake, Ontario. And become Canada's next iconic gold company. Additional information about the Company and its activities may be found on the Company's website at www.puregoldmining.ca and under the Company's profile at www.sedar.com.

ON BEHALF OF THE BOARD

Darin Labrenz, President & CEO

Neither TSX Venture Exchange nor its Regulation Services Provider (as that term is defined in the policies of the TSX Venture Exchange) accepts responsibility for the adequacy or accuracy of this release.

Certain statements made and information contained in this news release and elsewhere constitutes "forward-looking information" within the meaning of Canadian securities legislation. Any statements that express or involve discussions with respect to predictions, expectations, beliefs, plans, projections, objectives, assumptions or future events or performance are not statements of historical fact and may constitute forward-looking statements. Such forward-looking statements are based on certain assumptions and are subject to risks and uncertainties which could cause actual events or results to differ from those reflected in the forward-looking statements. Such factors include, but are not limited to, fluctuations in the price of gold and other commodities, continued exploration success, risks and uncertainties relating to the interpretation of drill results and the estimation of mineral resources and reserves, the geology, grade and continuity of mineral deposits, the possibility that future exploration and development results will not be consistent with the Company's expectations, changes in government legislation, taxation, controls, regulations and political or economic developments in Canada, risks associated with mining or development activities, the speculative nature of exploration and development, including the risk of obtaining necessary licenses and other risks and uncertainties including those described under Risk Factors in each management discussion and analysis and in the Company's annual information form which are available under the Company's profile at www.sedar.com. Many of these uncertainties and contingencies can affect the Company's actual performance and could cause actual performance to differ materially from those expressed or implied in any forward-looking statements made by, or on behalf of, the Company. Readers are cautioned that forward-looking statements are not guarantees of future performance. There can be no assurance that such statements will prove to be accurate and actual results and future events could differ materially from those acknowledged in such statements. The Company disclaims any intention or obligation to update or revise any forward-looking statements whether as a result of new information, future events or otherwise, except to the extent required by applicable laws. Accordingly, readers are advised not to place undue reliance on forward-looking statements. The Company does not undertake to update any forward-looking statement that may be made from time to time by the Company or on its behalf, except in accordance with applicable securities laws.

More Stories By Marketwired .

Copyright © 2009 Marketwired. All rights reserved. All the news releases provided by Marketwired are copyrighted. Any forms of copying other than an individual user's personal reference without express written permission is prohibited. Further distribution of these materials is strictly forbidden, including but not limited to, posting, emailing, faxing, archiving in a public database, redistributing via a computer network or in a printed form.

Latest Stories
"We've discovered that after shows 80% if leads that people get, 80% of the conversations end up on the show floor, meaning people forget about it, people forget who they talk to, people forget that there are actual business opportunities to be had here so we try to help out and keep the conversations going," explained Jeff Mesnik, Founder and President of ContentMX, in this SYS-CON.tv interview at 18th Cloud Expo, held June 7-9, 2016, at the Javits Center in New York City, NY.
Let’s face it, embracing new storage technologies, capabilities and upgrading to new hardware often adds complexity and increases costs. In his session at 18th Cloud Expo, Seth Oxenhorn, Vice President of Business Development & Alliances at FalconStor, discussed how a truly heterogeneous software-defined storage approach can add value to legacy platforms and heterogeneous environments. The result reduces complexity, significantly lowers cost, and provides IT organizations with improved efficienc...
SYS-CON Events announced today that Isomorphic Software will exhibit at DevOps Summit at 19th International Cloud Expo, which will take place on November 1–3, 2016, at the Santa Clara Convention Center in Santa Clara, CA. Isomorphic Software provides the SmartClient HTML5/AJAX platform, the most advanced technology for building rich, cutting-edge enterprise web applications for desktop and mobile. SmartClient combines the productivity and performance of traditional desktop software with the simp...
"When you think about the data center today, there's constant evolution, The evolution of the data center and the needs of the consumer of technology change, and they change constantly," stated Matt Kalmenson, VP of Sales, Service and Cloud Providers at Veeam Software, in this SYS-CON.tv interview at 18th Cloud Expo, held June 7-9, 2016, at the Javits Center in New York City, NY.
Internet of @ThingsExpo, taking place November 1-3, 2016, at the Santa Clara Convention Center in Santa Clara, CA, is co-located with the 19th International Cloud Expo and will feature technical sessions from a rock star conference faculty and the leading industry players in the world and ThingsExpo Silicon Valley Call for Papers is now open.
The IoT is changing the way enterprises conduct business. In his session at @ThingsExpo, Eric Hoffman, Vice President at EastBanc Technologies, discussed how businesses can gain an edge over competitors by empowering consumers to take control through IoT. He cited examples such as a Washington, D.C.-based sports club that leveraged IoT and the cloud to develop a comprehensive booking system. He also highlighted how IoT can revitalize and restore outdated business models, making them profitable ...
In his session at @DevOpsSummit at 19th Cloud Expo, Yoseph Reuveni, Director of Software Engineering at Jet.com, will discuss Jet.com's journey into containerizing Microsoft-based technologies like C# and F# into Docker. He will talk about lessons learned and challenges faced, the Mono framework tryout and how they deployed everything into Azure cloud. Yoseph Reuveni is a technology leader with unique experience developing and running high throughput (over 1M tps) distributed systems with extre...
To leverage Continuous Delivery, enterprises must consider impacts that span functional silos, as well as applications that touch older, slower moving components. Managing the many dependencies can cause slowdowns. See how to achieve continuous delivery in the enterprise.
"delaPlex is a software development company. We do team-based outsourcing development," explained Mark Rivers, COO and Co-founder of delaPlex Software, in this SYS-CON.tv interview at 18th Cloud Expo, held June 7-9, 2016, at the Javits Center in New York City, NY.
We all know the latest numbers: Gartner, Inc. forecasts that 6.4 billion connected things will be in use worldwide in 2016, up 30 percent from last year, and will reach 20.8 billion by 2020. We're rapidly approaching a data production of 40 zettabytes a day – more than we can every physically store, and exabytes and yottabytes are just around the corner. For many that’s a good sign, as data has been proven to equal money – IF it’s ingested, integrated, and analyzed fast enough. Without real-ti...
"There's a growing demand from users for things to be faster. When you think about all the transactions or interactions users will have with your product and everything that is between those transactions and interactions - what drives us at Catchpoint Systems is the idea to measure that and to analyze it," explained Leo Vasiliou, Director of Web Performance Engineering at Catchpoint Systems, in this SYS-CON.tv interview at 18th Cloud Expo, held June 7-9, 2016, at the Javits Center in New York Ci...
I wanted to gather all of my Internet of Things (IOT) blogs into a single blog (that I could later use with my University of San Francisco (USF) Big Data “MBA” course). However as I started to pull these blogs together, I realized that my IOT discussion lacked a vision; it lacked an end point towards which an organization could drive their IOT envisioning, proof of value, app dev, data engineering and data science efforts. And I think that the IOT end point is really quite simple…
As companies gain momentum, the need to maintain high quality products can outstrip their development team’s bandwidth for QA. Building out a large QA team (whether in-house or outsourced) can slow down development and significantly increases costs. This eBook takes QA profiles from 5 companies who successfully scaled up production without building a large QA team and includes: What to consider when choosing CI/CD tools How culture and communication can make or break implementation
Actian Corporation has announced the latest version of the Actian Vector in Hadoop (VectorH) database, generally available at the end of July. VectorH is based on the same query engine that powers Actian Vector, which recently doubled the TPC-H benchmark record for non-clustered systems at the 3000GB scale factor (see tpc.org/3323). The ability to easily ingest information from different data sources and rapidly develop queries to make better business decisions is becoming increasingly importan...
A critical component of any IoT project is what to do with all the data being generated. This data needs to be captured, processed, structured, and stored in a way to facilitate different kinds of queries. Traditional data warehouse and analytical systems are mature technologies that can be used to handle certain kinds of queries, but they are not always well suited to many problems, particularly when there is a need for real-time insights.