Welcome!

News Feed Item

Global Powder Metallurgy Industry

NEW YORK, Aug. 12, 2014 /PRNewswire/ -- Reportlinker.com announces that a new market research report is available in its catalogue:

 

Global Powder Metallurgy Industry

 

http://www.reportlinker.com/p098279/Global-Powder-Metallurgy-Industry.html

 

This report analyzes the worldwide markets for Powder Metallurgy in US$ Million and Tons by the following Product Segments: Iron & Steel, Stainless Steel, Tungsten, Aluminum, Precious Metal, and Others. The report provides separate comprehensive analytics for the US, and Rest of World. Annual estimates and forecasts are provided for the period 2013 through 2020. Also, a seven-year historic analysis is provided for these markets. Market data and analytics are derived from primary and secondary research. Company profiles are primarily based on public domain information including company URLs. The report profiles 133 companies including many key and niche players such as -

 

ACu Powder International, LLC

Allegheny Technologies Incorporated

Burgess-Norton Manufacturing Company

Carpenter Technology Corporation

Daido Steel Co. Ltd.

 

 

 

I. INTRODUCTION, METHODOLOGY & PRODUCT DEFINITIONS

 

Study Reliability and Reporting Limitations I-1

Disclaimers I-2

Data Interpretation & Reporting Level I-2

Quantitative Techniques & Analytics I-3

Product Definition and Scope of Study I-3

Iron & Steel I-3

Stainless Steel I-4

Tungsten I-4

Aluminum I-4

Precious Metal I-4

Others I-4

 

 

II. EXECUTIVE SUMMARY

 

1. OUTLOOK II-1

A Prelude II-1

Current and Future Market Analysis II-2

Analysis for Metal Powders II-2

Analysis for Powder Metallurgy (P/M) parts II-2

Improved Economic Outlook Paves Way for Growth II-2

World Economic Outlook II-3

Improvement in Global GDP Performance Bodes Well for the Market II-4

Table 1: World Real GDP Growth Rates in % (2013 & 2014E):

Breakdown by Country (includes corresponding Graph/Chart) II-5

 

Table 2: World GDP (2013): Percentage Share Breakdown of

Nominal GDP Value by Country (includes corresponding

Graph/Chart) II-6

Encouraging Gains in Global Manufacturing PMI Signals an

Optimistic Outlook for Metal Powders II-6

 

2. MARKET DYNAMICS II-8

Powder Metallurgy Market Review II-8

Table 3: Powder Metallurgy Market by Metal (2013): Percentage

Breakdown of Value Sales for Iron and Steel, Zinc, Aluminum

and Others (includes corresponding Graph/Chart) II-8

Automotive Industry - The Largest End-Use Industry for PM

Products II-8

Table 4: Global P/M Structural Components Market by

Application (2013) - Percentage Breakdown of Volume Sales for

Automotive, Hand Tools and Recreation Products, Industrial

Motors, Household Appliances, Hardware Components, Business

Machines, and Others (includes corresponding Graph/Chart) II-9

Asia-Pacific Continues to be a Growth Engine II-9

Expanding Applications Drive Powder Metals Market II-10

Newer Advances and Technological Breakthroughs Drive the Market II-10

VVT Components - A Peek into Opportunities and Hurdles II-11

MIM PM Components Set to Flourish II-11

Marked Trends towards Finer Powders and Advanced PM Parts II-11

Nanopowders: A Major Area of Focus II-12

Increasing Focus on Green Technology II-12

Supply Issues Affect Nickel Prices II-12

Leaner Steel Alloys Likely to Gain Favor as Prices Rise II-13

Tungsten Powders Market Witnesses Uncertainty II-13

Table 5: Tungsten Prices for the Period 2009-2014 (includes

corresponding Graph/Chart) II-13

Competitive Landscape II-14

Sintered Metals II-14

Table 6: Leading Players in the Global PM Sinter Metals

Market (2013): Percentage Breakdown of Value Sales by

Company (includes corresponding Graph/Chart) II-14

Diverse Company and Product Strategies II-14

Future Growth Directions for the PM Industry II-15

Diversification II-15

Sustainability II-15

Investments in Technology II-15

 

3. A REVIEW OF MAJOR END-USE SECTORS II-16

The Automotive Industry II-16

Key Research Takeaway II-16

Automotive Demand to Improve in Coming Years - Bodes Well for

the Market II-16

Expanding Global Vehicle Fleet and Increasing Number of

Average Miles Travelled Secures Market Future II-17

Table 7: Worldwide Vehicle Registrations (in Thousands) for

Years 2000, 2010 & 2020(P) (includes corresponding

Graph/Chart) II-18

Opportunity Indicators II-18

Table 8: Average Age of Light Vehicles (includes Car & Light

Commercial Vehicles) in the United States in the Year 2011

(includes corresponding Graph/Chart) II-18

 

Table 9: Average Age of Cars in Europe (2008, 2010 & 2013):

Breakdown of Number of Years (includes corresponding

Graph/Chart) II-19

 

Table 10: Global Automotive Market (2012 & 2017P):

Percentage Share Breakdown of Production Volume for

Commercial Vehicles & Passenger Cars by Region/Country

(includes corresponding Graph/Chart) II-19

Seeing Beyond the Recent Decline of the Automotive Industry II-20

Impact of China's Unimpressive Economic Growth on the Global

Auto Industry in the Year 2011 & 2012 II-20

Powder Metallurgy and Auto Industry II-21

Historical Relationship Between P/M and Automotive Industry II-21

Benefits for Automotive Industry II-21

Powder Metallurgy in Passenger Cars II-22

Recent Developments in the Automotive Industry II-22

Prospective Automotive Applications II-22

Carrier Housings II-23

VVT II-23

Aerospace II-23

PM Material in Aerospace Applications II-23

Growth in Aerospace Sector Augurs Well for Market II-23

Table 11: Aircraft Power Transmission Equipment Market

(2012): Percentage Share Breakdown of Shipments by End-Use

Application - Military Aircrafts & Civil Aircrafts (includes

corresponding Graph/Chart) II-24

Other End-Use Sectors II-25

Mechanization of Agriculture Spurs Growth II-25

Growing Demand for Mining & Construction Equipment Boosts

Growth in Powder Metallurgy Market II-25

DIY Tools and Domestic Appliances - Emerging End-Use Industries II-26

Rising Prospects for PM Material in Health Care Industry II-26

 

4. PRODUCT OVERVIEW AND ANALYSIS II-27

Powder Metallurgy (PM) Technology: A Primer II-27

A Peek into History of Metal Powders II-27

Definition II-27

Attributes II-27

Particle Size Distribution: A Key Attribute II-28

Metal Powders Classification II-28

Ferrous Powders II-28

Iron Powder II-28

Stainless Steel Powder II-29

Non-Ferrous Powders II-29

History II-29

Scope II-29

Types of Non-Ferrous Powders II-30

Aluminum Powder II-30

Copper (and Copper Alloy) Powder II-31

Table 12: Copper Production Worldwide by Type (2012 &

2013): Annual Volume Output for Mine Production and

Refined Production in Million Tons (includes

corresponding Graph/Chart) II-32

Nickel Powder II-33

Table 13: Leading Nickel Consuming Countries Worldwide:

Percentage Share Breakdown in Terms of Volume Consumption

(2013) - China, Europe, Asia, US Japan, America and

Others (includes corresponding Graph/Chart) II-34

 

Table 14: Nickel Consumption by End-use Applications

(2013): Percentage Share Breakdown In Terms of Volume

Usage for Stainless Steel, Electroplating, Other Nickel

Alloys, Other Steel Alloys, Super Alloys, Rechargeable

Batteries, Foundry, and Others (includes corresponding

Graph/Chart) II-34

Titanium Powder II-35

Refractory Metals II-35

Powder Metallurgy II-35

Introduction II-35

Powder Metallurgy Vs. Other Techniques (Machining, Die

Casting and Forging) II-36

Process Description II-36

Fundamental Steps II-37

Types of Methods II-38

Mixing II-38

Pressing II-39

Forming II-39

Sintering II-39

Sinter Hardening II-40

Post Sintering Operations II-40

Re-Pressing II-41

Hot Re-Press II-41

Forging II-41

Infiltration II-41

Impregnation II-41

Heat Treatment II-41

Surface-Hardening II-41

Steam Treatment II-42

Blueing II-42

Plating II-42

Coatings II-42

Mechanical Treatment II-42

De-burring II-42

Rapid Solidification II-42

Advantages II-43

Disadvantages II-43

Sintered Components: An Overview II-44

Metal Powders Present Rich Scope for Economical, Creative

Design Offerings II-44

Benefits and Features of Sintered Components II-44

The Manufacturing Process for Sintered Components II-45

Applications of PM and PM Parts II-45

Metal Powders II-45

PM Parts II-46

Powder Metallurgy: Suitable Technique for Parts Production

and MMC II-46

Powder Metallurgy Magnets II-46

Powder Metallurgy in Tool Steels II-47

Products Derived from Metal Powders II-47

Mechanical or Structural Components II-47

Ferrous Structural Parts II-47

Non-Ferrous Structural Components II-48

Exclusive High-Duty Alloys II-48

Composite Materials II-48

Hard Metals and Diamond Tools II-48

Magnetic and Electric Parts II-49

Porous Materials II-49

Powder Metal Parts: Production Technologies II-49

High-Potential Technologies II-49

Direct Metal Deposition (DMD) II-49

Dynamic Magnetic Compression (DMC) II-49

Spray Forming II-50

Metal Injection Molding (MIM) II-50

Powder Injection Molding (PIM) II-51

Traditional Methods II-52

Hot Pressing II-52

Isostatic Pressing II-52

Cold Isostatic Pressing II-52

Hot Isostatic Pressing II-52

Extrusion II-52

Hot Extrusion II-53

Cold Extrusion II-53

Roll Compaction II-53

Other Methods II-54

Powder Forging II-54

Powder Rolling II-54

Net Shape Processing II-54

Powder Metal Processing Techniques II-54

Atomization Process II-55

Gas Atomization II-56

Water Atomization II-56

Electrolysis II-56

Mechanical Comminution Methods II-56

Mechanical Alloying II-57

Chemical Methods II-57

Diffusion Bonding II-57

Solid State Reduction II-57

Hydrometallurgical Process II-58

Hunter Process II-58

Kroll Process II-58

Powder Metallurgy Equipment II-59

Associations/Federations II-59

Metal Powder Industries Federation (MPIF) II-59

APMI International II-59

 

5. PRODUCT/PROCESS INTRODUCTIONS/ INNOVATIONS II-60

LPW Technology Introduces New Analytical Techniques and

Software for Additive Manufacturing II-60

EOS Develops Two Novel Metal Powders for AM II-60

GKN Showcases Thermal Series of Sintered Aluminum Materials II-60

GKN Showcases Powder Metallurgy Products II-60

 

6. RECENT INDUSTRY ACTIVITY II-61

Carraro Inks Agreement to Divest MG Mini Gears to Finatem II-61

Pyrogenesis Canada Signs a Letter of Intent II-61

PyroGenesis Takes Over CAD $2 Million Metallurgical Powder

Pilot Plant II-61

Iluka Resources Invests in Metalysis Limited II-61

5N Plus Acquires AM&M Advanced Machine and Materials II-61

SLM Solutions to Acquire a Metal Powder Producer II-61

Raymor Industries Divests AP&C division to PE-backed Arcam II-61

Hitachi Chemical Co. Merges with Hitachi Powdered Metals Co. II-61

O2 Investment Acquires Alpha Sintered Metals II-62

GRIPM Acquires Majority of Shares in Makin Metal Powders II-62

CREMER GmbH Acquires SOF EQUIPMENT II-62

Crestview Partners and CITIC Capital Acquire Stackpole II-62

Kennametal Inks an Agreement to Acquire Emura Assets II-62

Carpenter to Establish a New Superalloy Powder Facility II-62

Carpenter and UTC Ink Multi-Level Agreement II-62

UC RUSAL to Expand its SUAL Powder Metallurgy Plant II-63

Kennametal Acquires Tungsten Materials Business of TI II-63

Ames Takes Over Ferro Metal Powders Division II-63

Nippon Atomized Metal Powders Announces Ultrafine Powders

Capacity Expansion II-63

voestalpine Edelstahl Announces Capacity Expansion for Powder -

Metallurgical Product Range II-63

 

7. FOCUS ON SELECT PLAYERS II-64

ACu Powder International, LLC (US) II-64

Allegheny Technologies Incorporated (US) II-64

American Chemet Corp. (US) II-64

AMETEK Specialty Metal Products (US) II-65

Burgess-Norton Manufacturing Company (US) II-65

Carpenter Technology Corporation (US) II-65

Daido Steel Co. Ltd. (Japan) II-66

Diamet Corporation (Japan) II-66

Dowa Holdings Co. Ltd. (Japan) II-67

Erasteel SAS (France) II-67

F. W. Winter Inc. & Co. (US) II-68

Federal-Mogul Corp. (US) II-68

Fine Sinter Co. Ltd. (Japan) II-68

GKN Sinter Metals, Inc. (US) II-69

Hoeganaes Corp. (US) II-69

Hitachi Chemical Company, Ltd. (Japan) II-69

H.C. Starck GmbH (Germany) II-70

Höganäs AB (Sweden) II-70

JFE Steel Corp. (Japan) II-70

Kennametal, Inc. (US) II-71

Kobe Steel, Ltd. (Japan) II-71

Metaldyne LLC (US) II-71

Miba AG (Austria) II-72

Norilsk Nickel (Russia) II-72

PMG Holding GmbH (Germany) II-73

Pometon SpA (Italy) II-73

Sumitomo Electric Industries, Ltd. (Japan) II-73

 

8. GLOBAL MARKET PERSPECTIVE II-74

Metal Powders II-74

Table 15: World Recent Past, Current & Future Analysis for

Metal Powders by Geographic Region - US and Rest of World

Markets Independently Analyzed with Annual Sales Figures in

US$ Million for Years 2013 through 2020 (includes

corresponding Graph/Chart) II-74

 

Table 16: World Historic Review for Metal Powders by

Geographic Region - US and Rest of World Markets

Independently Analyzed with Annual Sales Figures in US$

Million for Years 2006 through 2012 (includes corresponding

Graph/Chart) II-75

 

Table 17: World 15-Year Perspective for Metal Powders by

Geographic Region - Percentage Breakdown of Dollar Sales for

US and Rest of World Markets for Years 2006, 2014 & 2020

(includes corresponding Graph/Chart) II-76

P/M Parts II-77

Table 18: World Recent Past, Current & Future Analysis for

P/M Parts by Geographic Region - US, Canada, Japan, Europe,

Asia-Pacific and Rest of World Markets Independently Analyzed

with Annual Sales Figures in US$ Million for Years 2013

through 2020 (includes corresponding Graph/Chart) II-77

 

Table 19: World Historic Review for P/M Parts by Geographic

Region - US, Canada, Japan, Europe, Asia-Pacific and Rest of

World Markets Independently Analyzed with Annual Sales

Figures in US$ Million for Years 2006 through 2012 (includes

corresponding Graph/Chart) II-78

 

Table 20: World 15-Year Perspective for P/M Parts by

Geographic Region - Percentage Breakdown of Dollar Sales for

US, Canada, Japan, Europe, Asia-Pacific and Rest of World

Markets for Years 2006, 2014 & 2020 (includes corresponding

Graph/Chart) II-79

 

 

III. MARKET

 

1. THE UNITED STATES III-1

A.Market Analysis III-1

Current & Future Analysis III-1

Metal Powder Demand Exhibits Growth III-1

Rising Demand for Metal Powder Cause Issues III-1

The US Auto Industry Withstands Fiscal Cliff, Sequestration

Cuts & Debt Ceiling Issues - Helps Partially Offset Loss in

Demand in Europe & Asia-Pacific III-2

Table 21: Percentage Share Breakdown of Budget

Sequestration of US$1.2 Trillion to be Achieved Over the

2013-2021 Period by Spending Area (includes corresponding

Graph/Chart) III-3

Technology Developments: Need of the Hour III-4

An Overview of Powder Metallurgy Industry in North America III-4

North American PM Market Rebounds III-4

MIM Powder and Parts Market on a Surge III-5

Market Dynamics III-5

Role of Metal Powders in Automotive Industry III-6

Increase in Light Trucks and SUVs III-6

Impact of Metal Parts on Automotive Industry III-6

Consumption Trends III-7

Developments in Iron Powder Segment III-7

Competitive Scenario III-7

Import and Export Scenario III-8

Metal Powders III-8

Table 22: US Metal Powder Exports by Type: Annual Export

Value in US$ Thousand for Years 2012 & 2013 (includes

corresponding Graph/Chart) III-8

 

Table 23: US Metal Powder Imports by Type: Annual Import

Value in US$ Thousand for Years 2012 & 2013 (includes

corresponding Graph/Chart) III-9

Aluminum Powders III-10

Table 24: US Exports of Aluminum Powder (2012 & 2013):

Percentage Breakdown of Annual Export Value by Destination

Country (includes corresponding Graph/Chart) III-10

 

Table 25: US Imports of Aluminum Powder (2012 & 2013):

Percentage Breakdown of Annual Import Value by Country of

Origin (includes corresponding Graph/Chart) III-11

Copper Powders III-12

Table 26: US Exports of Copper Powder (2012 & 2013):

Percentage Breakdown of Annual Export Value by Destination

Country (includes corresponding Graph/Chart) III-12

 

Table 27: US Imports of Copper Powder (2012 & 2013):

Percentage Breakdown of Import Value by Country of Origin

(includes corresponding Graph/Chart) III-13

Iron Powders and Granules III-14

Table 28: US Exports of Granules and Powders of Pig Iron,

Spiegeleisen, Iron or Steel (2012 & 2013): Percentage

Breakdown of Annual Export Value by Destination Country

(includes corresponding Graph/Chart) III-14

 

Table 29: US Imports of Granules and Powders of Pig Iron,

Spiegeleisen, Iron or Steel (2012 & 2013): Percentage

Breakdown of Annual Import Value by Country of Origin

(includes corresponding Graph/Chart) III-15

Molybdenum Powders III-16

Table 30: US Exports of Molybdenum Powders (2012 & 2013):

Percentage Breakdown of Annual Export Value by Destination

Country (includes corresponding Graph/Chart) III-16

 

Table 31: US Imports of Molybdenum Powders (2012 & 2013):

Percentage Breakdown of Annual Import Value by Country of

Origin (includes corresponding Graph/Chart) III-16

Nickel Flakes and Powders III-17

Table 32: US Exports of Nickel Flakes and Powders (2012 &

2013): Percentage Breakdown of Annual Export Value by

Destination Country (includes corresponding Graph/Chart) III-17

 

Table 33: US Imports of Nickel Flakes and Powders (2012 &

2013): Percentage Breakdown of Annual Import Value by

Country of Origin (includes corresponding Graph/Chart) III-18

Tungsten (Wolfram) Powders III-19

Table 34: US Exports of Tungsten (Wolfram) Powders (2012 &

2013): Percentage Breakdown of Export Value by Destination

Country (includes corresponding Graph/Chart) III-19

 

Table 35: US Imports of Tungsten (Wolfram) Powders (2012 &

2013): Percentage Breakdown of Import Value by Country of

Origin (includes corresponding Graph/Chart) III-20

Gold Powder III-21

Table 36: US Exports of Non-Monetary Gold Powders (2012 &

2013): Percentage Breakdown of Export Value by Destination

Country (includes corresponding Graph/Chart) III-21

 

Table 37: US Imports of Non-Monetary Gold Powders (2012 &

2013): Percentage Breakdown of Import Value by Country of

Origin (includes corresponding Graph/Chart) III-22

Product/Process Launches/Introductions III-23

Strategic Corporate Developments III-23

Select Players III-24

B.Market Analytics III-29

Metal Powders III-29

Value Analysis III-29

Table 38: US Recent Past, Current & Future Analysis for

Metal Powders by Product Segment - Iron & Steel, Stainless

Steel, Tungsten, Aluminum, Precious Metal and Other

Powders Markets Independently Analyzed with Annual Sales

Figures in US$ Million for Years 2013 through 2020

(includes corresponding Graph/Chart) III-29

 

Table 39: US Historic Review for Metal Powders by Product

Segment - Iron & Steel, Stainless Steel, Tungsten,

Aluminum, Precious Metal and Other Powders Markets

Independently Analyzed with Annual Sales Figures in US$

Million for Years 2006 through 2012 (includes

corresponding Graph/Chart) III-30

 

Table 40: US 15-Year Perspective for Metal Powders by

Product Segment - Percentage Breakdown of Dollar Sales for

Iron & Steel, Stainless Steel, Tungsten, Aluminum,

Precious Metal and Other Powders Markets for Years 2006,

2014 & 2020 (includes corresponding Graph/Chart) III-31

Volume Analysis III-32

Table 41: US Recent Past, Current & Future Analysis for

Metal Powders by Product Segment - Iron & Steel, Stainless

Steel, Tungsten, Aluminum and Other Powders Markets

Independently Analyzed with Annual Shipments in Tons for

Years 2013 through 2020 (includes corresponding

Graph/Chart) III-32

 

Table 42: US Historic Review for Metal Powders by Product

Segment - Iron & Steel, Stainless Steel, Tungsten,

Aluminum and Other Powders Markets Independently Analyzed

with Annual Shipments in Tons for Years 2006 through 2012

(includes corresponding Graph/Chart) III-33

 

Table 43: US 15-Year Perspective for Metal Powders by

Product Segment - Percentage Breakdown of Shipments for

Iron & Steel, Stainless Steel, Tungsten, Aluminum and

Other Powders Markets for Years 2006, 2014 & 2020

(includes corresponding Graph/Chart) III-34

P/M Parts III-35

Table 44: US Recent Past, Current & Future Analysis for P/M

Parts Market Analyzed with Annual Sales Figures in US$

Million for Years 2013 through 2020 (includes corresponding

Graph/Chart) III-35

 

Table 45: US Historic Review for P/M Parts Market Analyzed

with Annual Sales Figures in US$ Million for Years 2006

through 2012 (includes corresponding Graph/Chart) III-35

 

2. CANADA III-36

A.Market Analysis III-36

Current & Future Analysis III-36

Import and Export Scenario III-36

Metal Powder III-36

Table 46: Canadian Metal Powder Exports by Type: Annual

Export Value in US$ Thousand for Years 2012 & 2013

(includes corresponding Graph/Chart) III-36

 

Table 47: Canadian Metal Powder Imports by Type: Annual

Import Value in US$ Thousand for Years 2012 & 2013

(includes corresponding Graph/Chart) III-37

Aluminum Powders III-38

Table 48: Canadian Exports of Aluminum Powder (2012 &

2013): Percentage Breakdown of Annual Export Value by

Destination Country (includes corresponding Graph/Chart) III-38

 

Table 49: Canadian Imports of Aluminum Powder (2012 &

2013): Percentage Breakdown of Annual Import Value by

Country of Origin (includes corresponding Graph/Chart) III-39

Copper Powders III-40

Table 50: Canadian Exports of Copper Powder (2012 & 2013):

Percentage Breakdown of Annual Export Value by Destination

Country (includes corresponding Graph/Chart) III-40

 

Table 51: Canadian Imports of Copper Powder (2012 & 2013):

Percentage Breakdown of Annual Import Value by Country of

Origin (includes corresponding Graph/Chart) III-41

Iron Powders and Granules III-41

Table 52: Canadian Exports of Granules and Powders of Pig

Iron, Spiegeleisen, Iron or Steel (2012 & 2013):

Percentage Breakdown of Annual Export Value by Destination

Country (includes corresponding Graph/Chart) III-41

 

Table 53: Canadian Imports of Granules and Powders of Pig

Iron, Spiegeleisen, Iron or Steel (2012 & 2013):

Percentage Breakdown of Annual Import Value by Country of

Origin (includes corresponding Graph/Chart) III-42

Molybdenum Powders III-43

Table 54: Canadian Exports of Molybdenum Powders (2012 &

2013): Percentage Breakdown of Annual Export Value by

Destination Country (includes corresponding Graph/Chart) III-43

 

Table 55: Canadian Molybdenum Powders Market (2012 &

2013): Percentage Share Breakdown of Import Value by

Country of Origin for US, Germany, China, United Kingdom,

and Japan (includes corresponding Graph/Chart) III-43

Nickel Flakes and Powders III-44

Table 56: Canadian Exports of Nickel Flakes and Powders

(2012 & 2013): Percentage Breakdown of Annual Export Value

by Destination Country (includes corresponding

Graph/Chart) III-44

 

Table 57: Canadian Imports of Nickel Flakes and Powders

(2012 & 2013): Percentage Breakdown of Annual Import Value

by Country of Origin (includes corresponding Graph/Chart) III-45

Tungsten (Wolfram) Powders III-46

Table 58: Canadian Exports of Tungsten (Wolfram) Powders

(2012 & 2013): Percentage Breakdown of Export Value by

Destination Country (includes corresponding Graph/Chart) III-46

 

Table 59: Canadian Imports of Tungsten (Wolfram) Powders

(2012&2013): Percentage Breakdown of Import Value by

Country of Origin (includes corresponding Graph/Chart) III-47

Gold Powder III-48

Table 60: Canadian Exports of Non-Monetary Gold Powders

(2012 & 2013): Percentage Breakdown of Export Value by

Destination Country (includes corresponding Graph/Chart) III-48

 

Table 61: Canadian Imports of Non-Monetary Gold Powders

(2012 & 2013): Percentage Breakdown of Import Value by

Country of Origin (includes corresponding Graph/Chart) III-48

Strategic Corporate Developments III-49

B.Market Analytics III-50

Table 62: Canadian Recent Past, Current & Future Analysis

for P/M Parts Market Analyzed with Annual Sales Figures in

US$ Million for Years 2013 through 2020 (includes

corresponding Graph/Chart) III-50

 

Table 63: Canadian Historic Review for P/M Parts Market

Analyzed with Annual Sales Figures in US$ Million for Years

2006 through 2012 (includes corresponding Graph/Chart) III-51

 

3. JAPAN III-52

A.Market Analysis III-52

Current & Future Analysis III-52

Automotive Industry - The Key Market for PM Parts in Japan III-52

Table 64: PM Parts Production in Japan (2013): Percentage

Breakdown of Volume Output by Segment (includes

corresponding Graph/Chart) III-52

 

Table 65: PM Parts Production in Japan (2013): Percentage

Breakdown of Value Output by Segment (includes

corresponding Graph/Chart) III-53

 

Table 66: PM Machine Parts Production in Japan (2013):

Percentage Breakdown of Volume Output by Application

(includes corresponding Graph/Chart) III-53

The Uniqueness of Japanese Automotive Market III-53

A Peek into Non-Auto Applications of PM Parts III-54

Table 67: Japanese Non-Automotive Applications of PM Parts

(2013): Percentage Breakdown of Volume Output by

Application (includes corresponding Graph/Chart) III-54

Growth Slows Down for PM Demand III-55

Strategic Corporate Developments III-55

Select Players III-55

B.Market Analytics III-59

Table 68: Japanese Recent Past, Current & Future Analysis

for P/M Parts Market Analyzed with Annual Sales Figures in

US$ Million for Years 2013 through 2020 (includes

corresponding Graph/Chart) III-59

 

Table 69: Japanese Historic Review for P/M Parts Market

Analyzed with Annual Sales Figures in US$ Million for Years

2006 through 2012 (includes corresponding Graph/Chart) III-60

 

4. EUROPE III-61

A.Market Analysis III-61

Current & Future Analysis III-61

European Powder Metallurgy Industry III-61

Table 70: European PM Parts Production by Type (2013):

Percentage Breakdown of Volume Output for Hard Materials,

Structural Ferrous, Structural Non-Ferrous and Others

(includes corresponding Graph/Chart) III-61

End-Use Markets III-62

Declining Auto Sales Affect PM Market III-62

Impact of the Debt Crisis on the European Automotive

Industry During 2011-2013 III-62

Table 71: Breakdown of Gross Government Debt as Percentage

of GDP for the Year 2012 by Country (includes

corresponding Graph/Chart) III-64

 

Table 72: European Automobile Market: Estimated Plant

Capacity Utilization for the Years 2007, 2010, 2011 & 2012

(includes corresponding Graph/Chart) III-64

Product/Process Launch/Introduction III-65

Strategic Corporate Developments III-65

Select Players III-66

B.Market Analytics III-69

Table 73: European Recent Past, Current & Future Analysis

for P/M Parts by Geographic Region - France, Germany, Italy,

UK, Spain, Russia and Rest of Europe Markets Independently

Analyzed with Annual Sales Figures in US$ Million for Years

2013 through 2020 (includes corresponding Graph/Chart) III-69

 

Table 74: European Historic Review for P/M Parts by

Geographic Region - France, Germany, Italy, UK, Spain,

Russia and Rest of Europe Markets Independently Analyzed

with Annual Sales Figures in US$ Million for Years 2006

through 2012 (includes corresponding Graph/Chart) III-70

 

Table 75: European 15-Year Perspective for P/M Parts by

Geographic Region - Percentage Breakdown of Dollar Sales for

France, Germany, Italy, UK, Spain, Russia and Rest of Europe

Markets for Years 2006, 2014 & 2020 (includes corresponding

Graph/Chart) III-71

 

5. ASIA-PACIFIC III-72

A.Market Analysis III-72

Current & Future Analysis III-72

Overview of Select Regional Markets III-72

China III-72

Overview III-72

Chinese PM Market Surges III-72

Table 76: PM Parts Market in China (2013): Percentage

Breakdown of Value Sales by End-Use Application (includes

corresponding Graph/Chart) III-72

Foreign Manufacturers Enter Domestic Markets III-73

India III-73

Growth in Indian Automobile Industry Bodes Well with PM

Market III-73

Table 77: PM Parts Market in India (2013): Percentage

Breakdown of Value Sales by End-Use Application (includes

corresponding Graph/Chart) III-73

 

Table 78: Indian Production of Iron-based PM Parts:

Annual Output in Thousand Tonnes for Years 2008 through

2012 (includes corresponding Graph/Chart) III-74

 

Table 79: Indian Production of Copper-based PM Parts:

Annual Output in Thousand Tonnes for Years 2008 through

2012 (includes corresponding Graph/Chart) III-74

Hurdles to PM Industry in India III-74

South Korea III-75

Table 80: PM Parts Market in South Korea (2013):

Percentage Breakdown of Value Sales by End-Use Application

(includes corresponding Graph/Chart) III-75

B.Market Analytics III-76

Table 81: Asia-Pacific Recent Past, Current & Future

Analysis for P/M Parts Market Analyzed with Annual Sales

Figures in US$ Million for Years 2013 through 2020 (includes

corresponding Graph/Chart) III-76

 

Table 82: Asia-Pacific Historic Review for P/M Parts Market

Analyzed with Annual Sales Figures in US$ Million for Years

2006 through 2012 (includes corresponding Graph/Chart) III-77

 

6. REST OF WORLD III-78

Market Analysis III-78

Table 83: Rest of World Recent Past, Current & Future

Analysis for P/M Parts Market Analyzed with Annual Sales

Figures in US$ Million for Years 2013 through 2020 (includes

corresponding Graph/Chart) III-78

 

Table 84: Rest of World Historic Review for P/M Parts Market

Analyzed with Annual Sales Figures in US$ Million for Years

2006 through 2012 (includes corresponding Graph/Chart) III-79

 

 

IV. COMPETITIVE LANDSCAPE

 

Total Companies Profiled: 133 (including Divisions/Subsidiaries - 146)

 

The United States (50)

Canada (10)

Japan (18)

Europe (45)

- France (3)

- Germany (11)

- The United Kingdom (7)

- Italy (4)

- Spain (1)

- Rest of Europe (19)

Asia-Pacific (Excluding Japan) (19)

Latin America (3)

Middle East (1)

 

 

 

To order this report: Global Powder Metallurgy Industry

http://www.reportlinker.com/p098279/Global-Powder-Metallurgy-Industry.html

Contact Clare: [email protected]
US:(339) 368 6001
Intl:+1 339 368 6001

SOURCE Reportlinker

More Stories By PR Newswire

Copyright © 2007 PR Newswire. All rights reserved. Republication or redistribution of PRNewswire content is expressly prohibited without the prior written consent of PRNewswire. PRNewswire shall not be liable for any errors or delays in the content, or for any actions taken in reliance thereon.

Latest Stories
To get the most out of their data, successful companies are not focusing on queries and data lakes, they are actively integrating analytics into their operations with a data-first application development approach. Real-time adjustments to improve revenues, reduce costs, or mitigate risk rely on applications that minimize latency on a variety of data sources. In his session at @BigDataExpo, Jack Norris, Senior Vice President, Data and Applications at MapR Technologies, reviewed best practices to ...
DevOps promotes continuous improvement through a culture of collaboration. But in real terms, how do you: Integrate activities across diverse teams and services? Make objective decisions with system-wide visibility? Use feedback loops to enable learning and improvement? With technology insights and real-world examples, in his general session at @DevOpsSummit, at 21st Cloud Expo, Andi Mann, Chief Technology Advocate at Splunk, explored how leading organizations use data-driven DevOps to close th...
Continuous Delivery makes it possible to exploit findings of cognitive psychology and neuroscience to increase the productivity and happiness of our teams. In his session at 22nd Cloud Expo | DXWorld Expo, Daniel Jones, CTO of EngineerBetter, will answer: How can we improve willpower and decrease technical debt? Is the present bias real? How can we turn it to our advantage? Can you increase a team’s effective IQ? How do DevOps & Product Teams increase empathy, and what impact does empath...
As many know, the first generation of Cloud Management Platform (CMP) solutions were designed for managing virtual infrastructure (IaaS) and traditional applications. But that's no longer enough to satisfy evolving and complex business requirements. In his session at 21st Cloud Expo, Scott Davis, Embotics CTO, explored how next-generation CMPs ensure organizations can manage cloud-native and microservice-based application architectures, while also facilitating agile DevOps methodology. He expla...
Most technology leaders, contemporary and from the hardware era, are reshaping their businesses to do software. They hope to capture value from emerging technologies such as IoT, SDN, and AI. Ultimately, irrespective of the vertical, it is about deriving value from independent software applications participating in an ecosystem as one comprehensive solution. In his session at @ThingsExpo, Kausik Sridhar, founder and CTO of Pulzze Systems, discussed how given the magnitude of today's application ...
Modern software design has fundamentally changed how we manage applications, causing many to turn to containers as the new virtual machine for resource management. As container adoption grows beyond stateless applications to stateful workloads, the need for persistent storage is foundational - something customers routinely cite as a top pain point. In his session at @DevOpsSummit at 21st Cloud Expo, Bill Borsari, Head of Systems Engineering at Datera, explored how organizations can reap the bene...
With tough new regulations coming to Europe on data privacy in May 2018, Calligo will explain why in reality the effect is global and transforms how you consider critical data. EU GDPR fundamentally rewrites the rules for cloud, Big Data and IoT. In his session at 21st Cloud Expo, Adam Ryan, Vice President and General Manager EMEA at Calligo, examined the regulations and provided insight on how it affects technology, challenges the established rules and will usher in new levels of diligence arou...
You know you need the cloud, but you're hesitant to simply dump everything at Amazon since you know that not all workloads are suitable for cloud. You know that you want the kind of ease of use and scalability that you get with public cloud, but your applications are architected in a way that makes the public cloud a non-starter. You're looking at private cloud solutions based on hyperconverged infrastructure, but you're concerned with the limits inherent in those technologies. What do you do?
Recently, WebRTC has a lot of eyes from market. The use cases of WebRTC are expanding - video chat, online education, online health care etc. Not only for human-to-human communication, but also IoT use cases such as machine to human use cases can be seen recently. One of the typical use-case is remote camera monitoring. With WebRTC, people can have interoperability and flexibility for deploying monitoring service. However, the benefit of WebRTC for IoT is not only its convenience and interopera...
Sanjeev Sharma Joins June 5-7, 2018 @DevOpsSummit at @Cloud Expo New York Faculty. Sanjeev Sharma is an internationally known DevOps and Cloud Transformation thought leader, technology executive, and author. Sanjeev's industry experience includes tenures as CTO, Technical Sales leader, and Cloud Architect leader. As an IBM Distinguished Engineer, Sanjeev is recognized at the highest levels of IBM's core of technical leaders.
In his general session at 21st Cloud Expo, Greg Dumas, Calligo’s Vice President and G.M. of US operations, discussed the new Global Data Protection Regulation and how Calligo can help business stay compliant in digitally globalized world. Greg Dumas is Calligo's Vice President and G.M. of US operations. Calligo is an established service provider that provides an innovative platform for trusted cloud solutions. Calligo’s customers are typically most concerned about GDPR compliance, application p...
Mobile device usage has increased exponentially during the past several years, as consumers rely on handhelds for everything from news and weather to banking and purchases. What can we expect in the next few years? The way in which we interact with our devices will fundamentally change, as businesses leverage Artificial Intelligence. We already see this taking shape as businesses leverage AI for cost savings and customer responsiveness. This trend will continue, as AI is used for more sophistica...
The 22nd International Cloud Expo | 1st DXWorld Expo has announced that its Call for Papers is open. Cloud Expo | DXWorld Expo, to be held June 5-7, 2018, at the Javits Center in New York, NY, brings together Cloud Computing, Digital Transformation, Big Data, Internet of Things, DevOps, Machine Learning and WebRTC to one location. With cloud computing driving a higher percentage of enterprise IT budgets every year, it becomes increasingly important to plant your flag in this fast-expanding busin...
SYS-CON Events announced today that Synametrics Technologies will exhibit at SYS-CON's 22nd International Cloud Expo®, which will take place on June 5-7, 2018, at the Javits Center in New York, NY. Synametrics Technologies is a privately held company based in Plainsboro, New Jersey that has been providing solutions for the developer community since 1997. Based on the success of its initial product offerings such as WinSQL, Xeams, SynaMan and Syncrify, Synametrics continues to create and hone inn...
Smart cities have the potential to change our lives at so many levels for citizens: less pollution, reduced parking obstacles, better health, education and more energy savings. Real-time data streaming and the Internet of Things (IoT) possess the power to turn this vision into a reality. However, most organizations today are building their data infrastructure to focus solely on addressing immediate business needs vs. a platform capable of quickly adapting emerging technologies to address future ...