|By Marketwired .||
|September 4, 2014 03:05 AM EDT||
VANCOUVER, BRITISH COLUMBIA -- (Marketwired) -- 09/04/14 -- Gold Standard Ventures Corp. (TSX VENTURE: GSV)(NYSE MKT: GSV) ("Gold Standard" or the "Company") today announced plans for the Phase 2 exploration program at its 100%-owned/controlled Railroad-Pinion Project in Nevada's Carlin Trend. A budget of $2.5 million has been allocated to complete approximately 9,100 m of RC drilling at the Pinion oxide gold deposit and Bald Mountain oxide gold-copper target. One RC drill is currently drilling at Bald Mountain and a second RC rig will mobilize to Pinion in mid-September. Funding for this program was obtained in the financing which closed on August 19, 2014.
Pinion's first NI 43-101-compliant resource estimate is nearing completion using the data collected during the Phase 1 Pinion program. The estimate is expected to be released later this month.
Key highlights of the Phase 2 program include:
-- Complete about 6,300 meters of RC drilling to extend areas of known shallow oxide gold mineralization along strike and at depth, and to test new targets identified by the Phase 1 program and a new 3D geologic model (click the following link for Pinion deposit target map: (http://goldstandardv.com/images/pinion-grade-thickness.jpg). Gold mineralization at Pinion is very continuous and widespread within a highly permeable, silicified, and oxidized collapse breccia which is favorably sandwiched between relatively impermeable silty micrite of the overlying Mississippian Tripon Pass Formation and thick-bedded calcarenite of the underlying Devonian Devil's Gate Formation. -- Complete a 10 square kilometer soil grid designed to enhance near- surface oxide gold targets at Pinion and, follow-up on areas of favorable alteration and structure identified by 1:6000 geologic mapping west of the known Pinion deposit. -- Acquire additional lines of CSAMT geophysical data to identify drill targets in the footwall of the Bullion Fault Corridor, a major north- south striking normal fault that imparts structural controls on gold mineralization at Pinion and North Bullion. Gravity data and cross section interpretations on the southeastern extent of Pinion indicate the likely recurrence of the geological architecture at the North Bullion deposit, a target which has not been tested by historic drilling. CSAMT has proven accuracy in tracing this fault at North Bullion. -- Complete additional metallurgy.
-- Drill five vertical RC holes (about 2,800 meters) to expand the limits of known oxide gold and copper mineralization outside from the area of historic drilling and RRB13-01, a 2013 core hole that intersected two unique and separate zones of oxidized, collapse-breccia hosted mineralization (click the following link for a Bald Mountain drill hole map: (http://goldstandardv.com/images/bald-mountain-target-map.jpg). Intercepts included 56.1m of 1.47 g Au/t immediately above 23.3m of 0.4% Cu. Twelve holes in the target currently outline an area approximately 210 meters north-south by 550 meters east-west containing an oxidized, polymetallic system that remains open in all directions. -- Complete a 14 square kilometer ground magnetic survey over the Bald Mountain Au-Cu-Ag target, the Sylvania Ag-Cu-Pb target and the Eocene age Bullion Stock. In this geologic setting, marginal to the Bullion Stock and within proximal dike swarms, magnetite and pyrrhotite are spatially associated with zones of precious and base metal mineralization.
Mac Jackson, Gold Standard's Vice President of Exploration stated, "Most of our Phase 2 program is designed to define and expand the oxide mineral zones at the Pinion Deposit and Bald Mountain target, both of which are open in multiple directions. In addition, we will continue to explore the rest of our highly prospective, 115 square kilometer property on the Carlin Trend with Phase 2 soil sampling, ground magnetics, CSAMT and mapping that will help lead to our next new discovery at Railroad."
Sampling Methodology, Chain of Custody, Quality Control and Quality Assurance:
All sampling was conducted under the supervision of the Company's project geologists and the chain of custody from the drill to the sample preparation facility was continuously monitored. Core was cut at the Company's facility in Elko, NV and one half was sent to the lab for analysis and the other half retained in the original core box. A blank, quarter core duplicate or certified reference material was inserted approximately every tenth sample. The samples are delivered to ALS Minerals preparation facility in Elko, NV. The samples are crushed and pulverized and sample pulps are shipped to ALS Minerals certified laboratory in Vancouver. Pulps are digested and analyzed for gold using fire assay fusion and an atomic absorption spectroscopy (AAS) finish on a 30 gram split. All other elements are determined by ICP analysis. Data verification of the analytical results includes a statistical analysis of the duplicates, standards and blanks that must pass certain parameters for acceptance to insure accurate and verifiable results.
The scientific and technical content and interpretations contained in this news release have been reviewed, verified and approved by Steven R. Koehler, Gold Standard's Manager of Projects, BSc. Geology and CPG-10216, a Qualified Person as defined by NI 43-101, Standards of Disclosure for Mineral Projects.
ABOUT GOLD STANDARD VENTURES - Gold Standard is an advanced stage gold exploration company focused on district scale discoveries in Nevada. The Company's flagship project, the Railroad-Pinion Gold Project, is located within the prolific Carlin Trend. The recent Pinion gold deposit acquisition offers Gold Standard a potential near-term development option and further consolidates the Company's premier land package in the Carlin Trend. Gold Standard is moving towards building NI 43-101 compliant gold resources at both the near surface, oxide-gold Pinion deposit and the classic Carlin style, North Bullion gold deposit in 2014.
Neither the TSXV nor its Regulation Services Provider (as that term is defined in the policies of the TSX Venture Exchange) nor the NYSE MKT accepts responsibility for the adequacy or accuracy of this news release.
CAUTIONARY NOTE REGARDING FORWARD-LOOKING STATEMENTS
This news release contains forward-looking statements, which relate to future events or future performance and reflect management's current expectations and assumptions. Such forward-looking statements reflect management's current beliefs and are based on assumptions made by and information currently available to the Company. All statements, other than statements of historical fact, included herein including, without limitation, statements about our proposed exploration programs are forward looking statements. By their nature, forward-looking statements involve known and unknown risks, uncertainties and other factors which may cause our actual results, performance or achievements, or other future events, to be materially different from any future results, performance or achievements expressed or implied by such forward-looking statements. Risk factors affecting the Company include, among others: the results from our exploration programs, global financial conditions and volatility of capital markets, uncertainty regarding the availability of additional capital, fluctuations in commodity prices; title matters; and the additional risks identified in our filings with Canadian securities regulators on SEDAR in Canada (available at www.sedar.com) and with the SEC on EDGAR (available at www.sec.gov/edgar.shtml). These forward-looking statements are made as of the date hereof and, except as required under applicable securities legislation, the Company does not assume any obligation to update or revise them to reflect new events or circumstances.
On behalf of the Board of Directors of Gold Standard,
Jonathan Awde, President and Director
Artificial Intelligence has the potential to massively disrupt IoT. In his session at 18th Cloud Expo, AJ Abdallat, CEO of Beyond AI, will discuss what the five main drivers are in Artificial Intelligence that could shape the future of the Internet of Things. AJ Abdallat is CEO of Beyond AI. He has over 20 years of management experience in the fields of artificial intelligence, sensors, instruments, devices and software for telecommunications, life sciences, environmental monitoring, process...
May. 5, 2016 07:45 PM EDT Reads: 1,498
In his session at 18th Cloud Expo, Sagi Brody, Chief Technology Officer at Webair Internet Development Inc., will focus on real world deployments of DDoS mitigation strategies in every layer of the network. He will give an overview of methods to prevent these attacks and best practices on how to provide protection in complex cloud platforms. He will also outline what we have found in our experience managing and running thousands of Linux and Unix managed service platforms and what specifically c...
May. 5, 2016 07:00 PM EDT Reads: 1,375
Increasing IoT connectivity is forcing enterprises to find elegant solutions to organize and visualize all incoming data from these connected devices with re-configurable dashboard widgets to effectively allow rapid decision-making for everything from immediate actions in tactical situations to strategic analysis and reporting. In his session at 18th Cloud Expo, Shikhir Singh, Senior Developer Relations Manager at Sencha, will discuss how to create HTML5 dashboards that interact with IoT devic...
May. 5, 2016 07:00 PM EDT Reads: 1,470
The IoTs will challenge the status quo of how IT and development organizations operate. Or will it? Certainly the fog layer of IoT requires special insights about data ontology, security and transactional integrity. But the developmental challenges are the same: People, Process and Platform. In his session at @ThingsExpo, Craig Sproule, CEO of Metavine, will demonstrate how to move beyond today's coding paradigm and share the must-have mindsets for removing complexity from the development proc...
May. 5, 2016 06:00 PM EDT Reads: 1,038
We’ve worked with dozens of early adopters across numerous industries and will debunk common misperceptions, which starts with understanding that many of the connected products we’ll use over the next 5 years are already products, they’re just not yet connected. With an IoT product, time-in-market provides much more essential feedback than ever before. Innovation comes from what you do with the data that the connected product provides in order to enhance the customer experience and optimize busi...
May. 5, 2016 06:00 PM EDT Reads: 1,368
SYS-CON Events announced today that SoftLayer, an IBM Company, has been named “Gold Sponsor” of SYS-CON's 18th Cloud Expo, which will take place on June 7-9, 2016, at the Javits Center in New York, New York. SoftLayer, an IBM Company, provides cloud infrastructure as a service from a growing number of data centers and network points of presence around the world. SoftLayer’s customers range from Web startups to global enterprises.
May. 5, 2016 05:00 PM EDT Reads: 1,272
Many private cloud projects were built to deliver self-service access to development and test resources. While those clouds delivered faster access to resources, they lacked visibility, control and security needed for production deployments. In their session at 18th Cloud Expo, Steve Anderson, Product Manager at BMC Software, and Rick Lefort, Principal Technical Marketing Consultant at BMC Software, will discuss how a cloud designed for production operations not only helps accelerate developer...
May. 5, 2016 05:00 PM EDT Reads: 1,369
Peak 10, Inc., has announced the implementation of IT service management, a business process alignment initiative based on the widely adopted Information Technology Infrastructure Library (ITIL) framework. The implementation of IT service management enhances Peak 10’s current service-minded approach to IT delivery by propelling the company to deliver higher levels of personalized and prompt service. The majority of Peak 10’s operations employees have been trained and certified in the ITIL frame...
May. 5, 2016 04:00 PM EDT Reads: 1,188
A critical component of any IoT project is the back-end systems that capture data from remote IoT devices and structure it in a way to answer useful questions. Traditional data warehouse and analytical systems are mature technologies that can be used to handle large data sets, but they are not well suited to many IoT-scale products and the need for real-time insights. At Fuze, we have developed a backend platform as part of our mobility-oriented cloud service that uses Big Data-based approache...
May. 5, 2016 04:00 PM EDT Reads: 771
trust and privacy in their ecosystem. Assurance and protection of device identity, secure data encryption and authentication are the key security challenges organizations are trying to address when integrating IoT devices. This holds true for IoT applications in a wide range of industries, for example, healthcare, consumer devices, and manufacturing. In his session at @ThingsExpo, Lancen LaChance, vice president of product management, IoT solutions at GlobalSign, will teach IoT developers how t...
May. 5, 2016 03:45 PM EDT Reads: 732
As the rapid adoption of containers continues, companies are finding that they lack the operational tools to understand the behavior of applications deployed in these containers, and how to identify issues in their application infrastructure. For example, how are multiple containers within an application impacting each other’s performance? If an application’s service is degraded, which container is to blame? In the case of an application outage, what was the root cause of the outage?
May. 5, 2016 03:00 PM EDT Reads: 1,183
Digital payments using wearable devices such as smart watches, fitness trackers, and payment wristbands are an increasing area of focus for industry participants, and consumer acceptance from early trials and deployments has encouraged some of the biggest names in technology and banking to continue their push to drive growth in this nascent market. Wearable payment systems may utilize near field communication (NFC), radio frequency identification (RFID), or quick response (QR) codes and barcodes...
May. 5, 2016 02:45 PM EDT Reads: 1,065
SYS-CON Events announced today that CollabNet (www.collabnet.com) a global leader in enterprise software development and delivery solutions that help customers create high-quality applications at speed, will exhibit at SYS-CON's 18th International Cloud Expo®, which will take place on June 7-9, 2016, at the Javits Center in New York City, NY. The CEO of CollabNet Flint Brenton will also present about DevOps challenges in today’s global, open, and heterogeneous world of software development.
May. 5, 2016 02:39 PM EDT Reads: 324
Much of the value of DevOps comes from a (renewed) focus on measurement, sharing, and continuous feedback loops. In increasingly complex DevOps workflows and environments, and especially in larger, regulated, or more crystallized organizations, these core concepts become even more critical. In his session at @DevOpsSummit at 18th Cloud Expo, Andi Mann, Chief Technology Advocate at Splunk, will show how, by focusing on 'metrics that matter,' you can provide objective, transparent, and meaningfu...
May. 5, 2016 02:30 PM EDT Reads: 1,209
SYS-CON Events announced today that Peak 10, Inc., a national IT infrastructure and cloud services provider, will exhibit at SYS-CON's 18th International Cloud Expo®, which will take place on June 7-9, 2016, at the Javits Center in New York City, NY. Peak 10 provides reliable, tailored data center and network services, cloud and managed services. Its solutions are designed to scale and adapt to customers’ changing business needs, enabling them to lower costs, improve performance and focus inter...
May. 5, 2016 02:30 PM EDT Reads: 1,488