Welcome!

News Feed Item

Explor Intersects 2.187% Copper Over 9.66 Meters on the Chester Copper Property

ROUYN-NORANDA, QUEBEC -- (Marketwired) -- 11/30/16 -- Explor Resources Inc. ("Explor" or the "Corporation") (TSX VENTURE: EXS) (OTCQX: EXSFF) (FRANKFURT: E1H1) (BERLIN: E1H1) is pleased to announce the completion of 12 Diamond Drill Holes for a total of 2,027 meters on the Chester Copper Property. The Chester Copper property is located in the Northumberland County, 70 km southwest of Bathurst, New Brunswick and 50 km west-northwest of Miramichi, New Brunswick, within the Bathurst Mining Camp. This area has an extensive history in base metal production from VMS deposits.

There has been very little exploration work in this area of the Bathurst Mining Camp (BMC) since the initial exploration more than 60 years ago. Of significance also is the fact that three (3) age date studies of the rock in the area since 2005 have indicated an age of 469+/- 0.3 ma. All of the main largest VMS deposits in the BMC (including BMS #12 and #6, the Caribou Deposit (currently being developed by Travalli) and the past producing Heath Steele Mines, are associated with this age date for the footwall felsic rocks. That new data in 2007 places Explor's Chester deposit is in the same time frame as the Brunswick Mining No. 12 and No. 6 deposits located in the BMC.

New Brunswick is the home of the No 12 massive sulphide deposit (The Brunswick Deposit) which was in continuous production from 1964 to its closure in March of 2013 (to Feb 2013, 135,903,168 tonnes milled at 3.44 % Pb, 8.74 % Zn, 0.37 % Cu and 102 g/t Ag). The Brunswick deposits (No 6 and No 12) are situated in the Nepisiguit Falls Group of rocks in the Lower Tetagouche group of the BMC. There are 46 known VMS deposits in the BMC.

The property is located in the southern-most part of the Bathurst Mining Camp and consist of 174 Mineral Claim Units within a total of five (5) Mineral Claims (1571, 2428, 6003, 6005 and 7045) comprising approximately 3,828 hectares as shown on the attached map.

A total of 4 diamond drill holes were drilled on claim 1571. The first three diamond drill holes that were drilled were fan holes from the same location. This successfully tested the extension of the copper stringer zone for a distance of 190 meters west of previous drilling. The fourth drill hole was located approximately 100 meters west (and 38 meters south) of the first three drill holes, confirming the continuity of the mineralization to the west and adding 100 meters of strike length to the known deposit. It intersected the target horizon and favorable geology from 94 meters to 234.6 meters.

Further to the west the copper deposit goes down dip and onto claim 6003. At about 1,100 meters west of the first drill hole, drill hole 6003-16-012 was drilled at a vertical dip. It eventually went to a depth of 600 meters and intersected previously unknown mineralization near surface (18 meters) and also extending the deep main Chester Stringer zone an additional 650 meters westward than any previous reliable drilling (i.e. casing in place and core in government storage). It also confirms the existence of the alteration zone and the host stratigraphic horizon to a depth not previously known or expected. The chloritized favorable horizon extends from a depth of 472.5 meters to 561 meters with low grade copper mineralization documented from 519 meters to 543 meters.

In the north part of claim 6003, an untested soil geochemical anomaly was tested. Copper mineralization was discovered as pyrrhotite and chalcopyrite veinlets in felsic volcanic associated with the soil anomaly. Copper mineralization was also discovered in this area in 2014 and a soil survey on claim 7045 to the west have unexplained copper and lead anomalies which may be associated with previously mentioned soil anomaly and this horizon.

To the south on Claim 6005, two drill holes were put down to test a soil anomaly apparently associated with a historical drill hole, dating to about the 1956 to 1958 era, with a reported value of more than 2% copper. No indication of any mineralization was discovered in the two drill holes.

Preliminary results are shown below for Hole # 1571-16-001:


----------------------------------------------------------------------------
Summary of results from Drill hole 1571-16-001:
----------------------------------------------------------------------------

----------------------------------------------------------------------------
                                               Au     Ag            Zn    Pb
          From (m): To (m):   Length: (m)   (ppb)  (ppm)    Cu % (ppm) (ppm)
----------------------------------------------------------------------------
Zone 1    78.50     81.50     3.00            142   7.36   2.383  1708   138
----------------------------------------------------------------------------

----------------------------------------------------------------------------
Zone 2    86.00     89.10     3.10           57.3   3.91   1.808   608    75
----------------------------------------------------------------------------

----------------------------------------------------------------------------
Zone 3    119.00    122.55    3.55            113   6.65   7.973   932    86
----------------------------------------------------------------------------

----------------------------------------------------------------------------
Zone 4    135.00    144.50    9.50             31   1.06   0.976   141    25
----------------------------------------------------------------------------
includes: 137.80    144.50    6.70             33   1.28   1.240   144    25
----------------------------------------------------------------------------
and       142.00    144.50    2.50             39   2.08   2.308   220    25
----------------------------------------------------------------------------

----------------------------------------------------------------------------
Zone 5    153.00    162.66    9.66             84   1.93   2.187   198    36
----------------------------------------------------------------------------
includes  153.00    154.50    1.50             58   1.40   1.310   192    40
----------------------------------------------------------------------------
and       161.35    162.66    1.31            416   9.55  13.810   710    91
----------------------------------------------------------------------------

----------------------------------------------------------------------------
Zone 6    177.80    179.70    1.90             72   3.31   2.323   346    62
----------------------------------------------------------------------------

A total of 6 zones of copper mineralization were intersected in the above referenced Hole # 1571-16-001 Samples have been sent to the lab and assays are pending.

The Chester Property is known to contain both a copper deposit and a VMS deposit. The copper deposit has an Open Pit resource with Measured & Indicated resource of 1,400,000 tonnes grading 1.38% Cu, 0.06% Zn & 3.5 g/t Ag and an inferred resource of 2,089,000 tonnes grading 1.26% Cu (assayed for Cu only).

Chris Dupont, P.Eng is the qualified person responsible for the information contained in this release.

Explor Resources Inc. is a publicly listed company trading on the TSX Venture (EXS), on the OTCQX (EXSFF) and on the Frankfurt and Berlin Stock Exchanges (E1H1).

This Press Release was prepared by Explor. Neither the TSX Venture Exchange nor its Regulation Services Provider (as that term is defined in the Policies of the TSX Venture Exchange) has reviewed or accepts responsibility for the adequacy or accuracy of this release.

About Explor Resources Inc.

Explor Resources Inc. is a Canadian-based natural resources company with mineral holdings in Ontario, Quebec, Saskatchewan and New Brunswick. Explor is currently focused on exploration in the Abitibi Greenstone Belt. The belt is found in both provinces of Ontario and Quebec with approximately 33% in Ontario and 67% in Quebec. The Belt has produced in excess of 180,000,000 ounces of gold and 450,000,000 tonnes of cu-zn ore over the last 100 years. The Corporation was continued under the laws of Alberta in 1986 and has had its main office in Quebec since 2006.

Explor Resources Flagship project is the Timmins Porcupine West (TPW) Project located in the Porcupine mining camp, in the Province of Ontario. Teck Resources Ltd. is currently conducting an exploration program as part of an earn-in on the TPW property. The TPW mineral resource (Press Release dated August 27, 2013) includes the following:

Open Pit Mineral Resources at a 0.30 g/t Au cut-off grade are as follows:


     Indicated:          213,000 oz (4,283,000 tonnes at 1.55 g/t Au)
     Inferred:           77,000 oz (1,140,000 tonnes at 2.09 g/t Au)

Underground Mineral Resources at a 1.70 g/t Au cut-off grade are as follows:


     Indicated:          396,000 oz (4,420,000 tonnes at 2.79 g/t Au)
     Inferred:           393,000 oz (5,185,000 tonnes at 2.36 g/t Au)

This document may contain forward-looking statements relating to Explor's operations or to the environment in which it operates. Such statements are based on operations, estimates, forecasts and projections. They are not guarantees of future performance and involve risks and uncertainties that are difficult to predict and may be beyond Explor's control. A number of important factors could cause actual outcomes and results to differ materially from those expressed in forward-looking statements, including those set forth in other public filling. In addition, such statements relate to the date on which they are made. Consequently, undue reliance should not be placed on such forward-looking statements. Explor disclaims any intention or obligation to update or revise any forward-looking statements, whether as a result of new information, future events or otherwise, save and except as may be required by applicable securities laws.

To view the image associated with this press release, please visit the following link: http://media3.marketwire.com/docs/CHESTERLRG.jpg

More Stories By Marketwired .

Copyright © 2009 Marketwired. All rights reserved. All the news releases provided by Marketwired are copyrighted. Any forms of copying other than an individual user's personal reference without express written permission is prohibited. Further distribution of these materials is strictly forbidden, including but not limited to, posting, emailing, faxing, archiving in a public database, redistributing via a computer network or in a printed form.

Latest Stories
Predictive analytics tools monitor, report, and troubleshoot in order to make proactive decisions about the health, performance, and utilization of storage. Most enterprises combine cloud and on-premise storage, resulting in blended environments of physical, virtual, cloud, and other platforms, which justifies more sophisticated storage analytics. In his session at 18th Cloud Expo, Peter McCallum, Vice President of Datacenter Solutions at FalconStor, discussed using predictive analytics to mon...
The Internet of Things will challenge the status quo of how IT and development organizations operate. Or will it? Certainly the fog layer of IoT requires special insights about data ontology, security and transactional integrity. But the developmental challenges are the same: People, Process and Platform and how we integrate our thinking to solve complicated problems. In his session at 19th Cloud Expo, Craig Sproule, CEO of Metavine, demonstrated how to move beyond today's coding paradigm and sh...
Today we can collect lots and lots of performance data. We build beautiful dashboards and even have fancy query languages to access and transform the data. Still performance data is a secret language only a couple of people understand. The more business becomes digital the more stakeholders are interested in this data including how it relates to business. Some of these people have never used a monitoring tool before. They have a question on their mind like “How is my application doing” but no id...
@GonzalezCarmen has been ranked the Number One Influencer and @ThingsExpo has been named the Number One Brand in the “M2M 2016: Top 100 Influencers and Brands” by Onalytica. Onalytica analyzed tweets over the last 6 months mentioning the keywords M2M OR “Machine to Machine.” They then identified the top 100 most influential brands and individuals leading the discussion on Twitter.
DevOps is being widely accepted (if not fully adopted) as essential in enterprise IT. But as Enterprise DevOps gains maturity, expands scope, and increases velocity, the need for data-driven decisions across teams becomes more acute. DevOps teams in any modern business must wrangle the ‘digital exhaust’ from the delivery toolchain, "pervasive" and "cognitive" computing, APIs and services, mobile devices and applications, the Internet of Things, and now even blockchain. In this power panel at @...
Get deep visibility into the performance of your databases and expert advice for performance optimization and tuning. You can't get application performance without database performance. Give everyone on the team a comprehensive view of how every aspect of the system affects performance across SQL database operations, host server and OS, virtualization resources and storage I/O. Quickly find bottlenecks and troubleshoot complex problems.
IoT is rapidly changing the way enterprises are using data to improve business decision-making. In order to derive business value, organizations must unlock insights from the data gathered and then act on these. In their session at @ThingsExpo, Eric Hoffman, Vice President at EastBanc Technologies, and Peter Shashkin, Head of Development Department at EastBanc Technologies, discussed how one organization leveraged IoT, cloud technology and data analysis to improve customer experiences and effici...
In his session at 19th Cloud Expo, Claude Remillard, Principal Program Manager in Developer Division at Microsoft, contrasted how his team used config as code and immutable patterns for continuous delivery of microservices and apps to the cloud. He showed how the immutable patterns helps developers do away with most of the complexity of config as code-enabling scenarios such as rollback, zero downtime upgrades with far greater simplicity. He also demoed building immutable pipelines in the cloud ...
@DevOpsSummit taking place June 6-8, 2017 at Javits Center, New York City, is co-located with the 20th International Cloud Expo and will feature technical sessions from a rock star conference faculty and the leading industry players in the world. @DevOpsSummit at Cloud Expo New York Call for Papers is now open.
In IT, we sometimes coin terms for things before we know exactly what they are and how they’ll be used. The resulting terms may capture a common set of aspirations and goals – as “cloud” did broadly for on-demand, self-service, and flexible computing. But such a term can also lump together diverse and even competing practices, technologies, and priorities to the point where important distinctions are glossed over and lost.
As data explodes in quantity, importance and from new sources, the need for managing and protecting data residing across physical, virtual, and cloud environments grow with it. Managing data includes protecting it, indexing and classifying it for true, long-term management, compliance and E-Discovery. Commvault can ensure this with a single pane of glass solution – whether in a private cloud, a Service Provider delivered public cloud or a hybrid cloud environment – across the heterogeneous enter...
All clouds are not equal. To succeed in a DevOps context, organizations should plan to develop/deploy apps across a choice of on-premise and public clouds simultaneously depending on the business needs. This is where the concept of the Lean Cloud comes in - resting on the idea that you often need to relocate your app modules over their life cycles for both innovation and operational efficiency in the cloud. In his session at @DevOpsSummit at19th Cloud Expo, Valentin (Val) Bercovici, CTO of Soli...
Data is the fuel that drives the machine learning algorithmic engines and ultimately provides the business value. In his session at Cloud Expo, Ed Featherston, a director and senior enterprise architect at Collaborative Consulting, discussed the key considerations around quality, volume, timeliness, and pedigree that must be dealt with in order to properly fuel that engine.
Regulatory requirements exist to promote the controlled sharing of information, while protecting the privacy and/or security of the information. Regulations for each type of information have their own set of rules, policies, and guidelines. Cloud Service Providers (CSP) are faced with increasing demand for services at decreasing prices. Demonstrating and maintaining compliance with regulations is a nontrivial task and doing so against numerous sets of regulatory requirements can be daunting task...
Successful digital transformation requires new organizational competencies and capabilities. Research tells us that the biggest impediment to successful transformation is human; consequently, the biggest enabler is a properly skilled and empowered workforce. In the digital age, new individual and collective competencies are required. In his session at 19th Cloud Expo, Bob Newhouse, CEO and founder of Agilitiv, drew together recent research and lessons learned from emerging and established compa...