|By PR Newswire||
|March 20, 2017 12:45 PM EDT|
DUBLIN, Mar 20, 2017 /PRNewswire/ --
Research and Markets has announced the addition of the "Samsung LM101A Chip Scale Package LEDL: Manufacturing" report to their offering.
The LM101A is the first LED family from Samsung in chip scale packaging (CSP). These LEDs have been developed for indoor lighting applications, including bulb, candle, MR16, PAR and spotlight. The reference device that was analyzed, the SCP8TT78HPL1TLS06E, is a neutral white LED with CRI of 80 and flux of 64lm for a current of 150mA, emitting 140lm/W. With 64lm coming from 1.44mm2, the LM101A LED from Samsung offers high light density.
CSP LEDs are a new market, representing 0.8% of the LED market today, but which will be six times larger in 2021. This component gives Samsung a position in the CSP LED sector.
Samsung has developed CSP LEDs to minimize component area, reducing the footprint on the circuit board by up to 70%. Moreover, without substrates, these LEDs have lower thermal resistance.
Bringing together flip chip LEDs and silicone molding provides a wide beam angle in a very thin device.
The simplicity of the packaging, without substrate and wire bonding, explains the high reliability of the component and the very low cost of the packaging.
The LED die is manufactured with mature technology but some new advances have been observed that reduce the manufacturing cost. The noble metals were replaced by stacking standard metals and a dicing technique has been newly adapted to LEDs in order to increase the number of dies per wafer.
The report presents a deep technology analysis of the packaging and the components, with images of the epitaxial layer stack and electrode structure.
Key Topics Covered:
Overview / Introduction
- Reverse Costing Methodology
- Package views and dimensions
- Package cross-section
- Package process
- LED Die
- LED die view and dimensions
- LED die process
- LED die cross-section
- LED die cross-section cathode
- LED die cross-section anode
- LED die process characteristic
LED Manufacturing Process
LED Die Front-End Process
- LED Die Fabrication Unit
- Package Process flow
- Final Test and Packaging Fabrication unit
Synthesis of the Cost Analysis
- Main steps of the Economic Analysis
- Yield Hypotheses
- LED Front-End Cost
- LED Wafer Cost
- LED Wafer Cost by Process Step
- Back-End: Probe Test and Dicing Cost
- LED Die Cost
- Packaging and Final Test Cost
- Component Cost
For more information about this report visit http://www.researchandmarkets.com/research/d3zdl5/samsung_lm101a
Research and Markets
Laura Wood, Senior Manager
For E.S.T Office Hours Call +1-917-300-0470
For U.S./CAN Toll Free Call +1-800-526-8630
For GMT Office Hours Call +353-1-416-8900
U.S. Fax: 646-607-1907
Fax (outside U.S.): +353-1-481-1716
SYS-CON Events announced today that Cloudistics, an on-premises cloud computing company, has been named “Bronze Sponsor” of SYS-CON's 20th International Cloud Expo®, which will take place on June 6-8, 2017, at the Javits Center in New York City, NY. Cloudistics delivers a complete public cloud experience with composable on-premises infrastructures to medium and large enterprises. Its software-defined technology natively converges network, storage, compute, virtualization, and management into a ...
Mar. 28, 2017 09:45 AM EDT Reads: 2,197
SYS-CON Events announced today that SD Times | BZ Media has been named “Media Sponsor” of SYS-CON's 20th International Cloud Expo, which will take place on June 6–8, 2017, at the Javits Center in New York City, NY. BZ Media LLC is a high-tech media company that produces technical conferences and expositions, and publishes a magazine, newsletters and websites in the software development, SharePoint, mobile development and commercial UAV markets.
Mar. 28, 2017 09:45 AM EDT Reads: 4,387
Historically, some banking activities such as trading have been relying heavily on analytics and cutting edge algorithmic tools. The coming of age of powerful data analytics solutions combined with the development of intelligent algorithms have created new opportunities for financial institutions. In his session at 20th Cloud Expo, Sebastien Meunier, Head of Digital for North America at Chappuis Halder & Co., will discuss how these tools can be leveraged to develop a lasting competitive advanta...
Mar. 28, 2017 09:30 AM EDT Reads: 2,813
Building custom add-ons does not need to be limited to the ideas you see on a marketplace. In his session at 20th Cloud Expo, Sukhbir Dhillon, CEO and founder of Addteq, will go over some adventures they faced in developing integrations using Atlassian SDK and other technologies/platforms and how it has enabled development teams to experiment with newer paradigms like Serverless and newer features of Atlassian SDKs. In this presentation, you will be taken on a journey of Add-On and Integration ...
Mar. 28, 2017 09:30 AM EDT Reads: 3,212
Now that the world has connected “things,” we need to build these devices as truly intelligent in order to create instantaneous and precise results. This means you have to do as much of the processing at the point of entry as you can: at the edge. The killer use cases for IoT are becoming manifest through AI engines on edge devices. An autonomous car has this dual edge/cloud analytics model, producing precise, real-time results. In his session at @ThingsExpo, John Crupi, Vice President and Eng...
Mar. 28, 2017 09:15 AM EDT Reads: 4,043
There are 66 million network cameras capturing terabytes of data. How did factories in Japan improve physical security at the facilities and improve employee productivity? Edge Computing reduces possible kilobytes of data collected per second to only a few kilobytes of data transmitted to the public cloud every day. Data is aggregated and analyzed close to sensors so only intelligent results need to be transmitted to the cloud. Non-essential data is recycled to optimize storage.
Mar. 28, 2017 08:15 AM EDT Reads: 3,154
"I think that everyone recognizes that for IoT to really realize its full potential and value that it is about creating ecosystems and marketplaces and that no single vendor is able to support what is required," explained Esmeralda Swartz, VP, Marketing Enterprise and Cloud at Ericsson, in this SYS-CON.tv interview at @ThingsExpo, held June 7-9, 2016, at the Javits Center in New York City, NY.
Mar. 28, 2017 08:00 AM EDT Reads: 4,413
Microservices are a very exciting architectural approach that many organizations are looking to as a way to accelerate innovation. Microservices promise to allow teams to move away from monolithic "ball of mud" systems, but the reality is that, in the vast majority of organizations, different projects and technologies will continue to be developed at different speeds. How to handle the dependencies between these disparate systems with different iteration cycles? Consider the "canoncial problem" ...
Mar. 28, 2017 06:00 AM EDT Reads: 8,916
As businesses adopt functionalities in cloud computing, it’s imperative that IT operations consistently ensure cloud systems work correctly – all of the time, and to their best capabilities. In his session at @BigDataExpo, Bernd Harzog, CEO and founder of OpsDataStore, will present an industry answer to the common question, “Are you running IT operations as efficiently and as cost effectively as you need to?” He will expound on the industry issues he frequently came up against as an analyst, and...
Mar. 28, 2017 06:00 AM EDT Reads: 4,309
Why do your mobile transformations need to happen today? Mobile is the strategy that enterprise transformation centers on to drive customer engagement. In his general session at @ThingsExpo, Roger Woods, Director, Mobile Product & Strategy – Adobe Marketing Cloud, covered key IoT and mobile trends that are forcing mobile transformation, key components of a solid mobile strategy and explored how brands are effectively driving mobile change throughout the enterprise.
Mar. 28, 2017 06:00 AM EDT Reads: 2,985
After more than five years of DevOps, definitions are evolving, boundaries are expanding, ‘unicorns’ are no longer rare, enterprises are on board, and pundits are moving on. Can we now look at an evolution of DevOps? Should we? Is the foundation of DevOps ‘done’, or is there still too much left to do? What is mature, and what is still missing? What does the next 5 years of DevOps look like? In this Power Panel at DevOps Summit, moderated by DevOps Summit Conference Chair Andi Mann, panelists l...
Mar. 28, 2017 05:00 AM EDT Reads: 9,896
In their Live Hack” presentation at 17th Cloud Expo, Stephen Coty and Paul Fletcher, Chief Security Evangelists at Alert Logic, provided the audience with a chance to see a live demonstration of the common tools cyber attackers use to attack cloud and traditional IT systems. This “Live Hack” used open source attack tools that are free and available for download by anybody. Attendees learned where to find and how to operate these tools for the purpose of testing their own IT infrastructure. The...
Mar. 28, 2017 04:45 AM EDT Reads: 7,490
Keeping pace with advancements in software delivery processes and tooling is taxing even for the most proficient organizations. Point tools, platforms, open source and the increasing adoption of private and public cloud services requires strong engineering rigor - all in the face of developer demands to use the tools of choice. As Agile has settled in as a mainstream practice, now DevOps has emerged as the next wave to improve software delivery speed and output. To make DevOps work, organization...
Mar. 28, 2017 02:30 AM EDT Reads: 2,060
My team embarked on building a data lake for our sales and marketing data to better understand customer journeys. This required building a hybrid data pipeline to connect our cloud CRM with the new Hadoop Data Lake. One challenge is that IT was not in a position to provide support until we proved value and marketing did not have the experience, so we embarked on the journey ourselves within the product marketing team for our line of business within Progress. In his session at @BigDataExpo, Sum...
Mar. 28, 2017 02:15 AM EDT Reads: 3,148
The modern software development landscape consists of best practices and tools that allow teams to deliver software in a near-continuous manner. By adopting a culture of automation, measurement and sharing, the time to ship code has been greatly reduced, allowing for shorter release cycles and quicker feedback from customers and users. Still, with all of these tools and methods, how can teams stay on top of what is taking place across their infrastructure and codebase? Hopping between services a...
Mar. 28, 2017 02:15 AM EDT Reads: 9,922