Enabling the industrial IoT with cyber security in mind

As technology has evolved, so has the intelligence and sophistication of cyber terrorists and their tactics.

Industrial Internet of Things (IIoT) networking technology and wireless Machine-to-Machine (M2M) communications solutions are critical to the daily operations of an increasingly connected and industrial world. With a greater dependence on providing reliable and secure high-speed connectivity to personnel, smart devices, machinery and many other geographically dispersed assets, electric utility operators require powerful, yet flexible, communications solutions for the business demands. The overall value proposition that these technologies bring is important for decision-makers to adopt and integrate into their smart grid infrastructures. Some of the main benefits are:

  • Optimising resource utilisation for increased efficiency.
  • Increasing visibility into potential failures and key operational factors through real-time information.
  • Reducing costs and environmental impact through monitoring/control across large geographic regions.
  • Automating safety and security measures to reduce critical event response time.
  • Centralising policy management to create greater adherence and more uniform enforcement of regulatory and compliance factors.
  • Enabling flexibility, scalability and mobility of networks to increase agility to changing market demands

Since electricity transmission and distribution grids are only as efficient, reliable and safe as the equipment and technology used, wireless communications equipment and technologies used in these grids must follow suit.

Furthermore, as utility operators continue to look for ways to improve their transmission and distribution networks, wireless M2M communications is a critical component because of rapid network installation, lower operational costs, high data throughput, and secure end-to-end transport. In order to achieve these benefits, wireless data networks must be aligned to specific and ranging requirements of the energy grid (generation, transmission, distribution and consumption) in which the wireless communications are utilised and exploited. Wireless IIoT networks transport vast volumes of information from a myriad of applications that are the smart grid; IIoT is the “glue” that holds, binds and delivers the Smart Grid.

In fact, electric utilities are at the forefront of the Industrial Internet of Things with complex and comprehensive wireless networks for advanced metering infrastructure, energy management, distribution and substation automation. It is estimated growth in IIoT applications for utilities and energy industries will increase from 485 million devices in 2013 to over 1.5 billion devices by 2020. This explosive growth in wireless networks, smart sensors and devices, and automated systems requires utilities to address, implement and monitor the security of their data networks because these are the networks providing command and control of critical infrastructure that is the Smart Gird.

As technology has evolved, so has the intelligence and sophistication of cyber terrorists and their tactics. In 2013, 40 per cent of the cyber-attacks handled by the Department of Homeland Security were against companies in the energy sector; one of the 16 Critical Infrastructure Sectors.

Considering the industrial internet threats to an electric power grid

According to the Federal Communications Commission (FCC), the two most common threats to wireless networking and communications technologies are Denial of Service (DoS) and Intrusion:

Denial of Service

Denial of Service is an attempt to make a computer resource or network unavailable to its intended users. DoS attacks could be as simple as jamming an electric or electromagnetic signal or as sophisticated as saturating a system or network with data traffic intended to overwhelm and make the network unavailable. The consequences of DoS attacks range from being simply irritating to destructive. For example, a valve controller does not receive a command to open a value to provide cooling oil resulting in distribution transformer system to overheat resulting in power outages.


Penetrating and intruding into a network or computer resource requires a different level of sophistication. Consequences can range from simply spying or stealing information to corrupting data or maliciously and intentionally causing harm or destruction by taking over network and/or computers and control systems. For example, intentionally penetrating energy management system networks to disrupt and even cut off or redirect the delivery of power to and from substations.

Additional Threats:

  • Sophisticated command and control attacks
  • Packet spoofing
  • Hijacking of sessions / interception
  • Replay attacks
  • Use of worms
  • Trojans and remote controllable Trojans (Back Orifice)
  • Use of a Virus and Anti-forensic techniques
  • Attacks on Domain Name System (DNS) infrastructure

These threats are not limited to wireless communication technologies and need to be addressed as part of a comprehensive cyber security strategy. Organisations must also plan for human error and/or deliberate attacks from internal sources.

Wireless M2M technology and the concept of resiliency

In order to harden a wireless M2M communications network, and further make IIoT networks and their connected assets less vulnerable to cyber threats, organisations need to implement a multi-layer security strategy, which includes robust networking equipment, hardened communications equipment, network access control and data encryption.

Hardened Communications Equipment

The first line of security is “trusted” networking equipment, where trusted equipment is far more than buying a recognised or favourite brand. Equipment should have the following characteristics.

- Enclosure should have a physical indicator that the mechanical enclosure has not been opened. This can be as simple as a tamper tape or more complex potted solutions.

- The equipment should have a Secure Bootloader, which resides in secure memory so that it cannot be altered or replaced. In addition, the Secure Bootloader validates the executable software image prior to loading it into memory. If the software image is not validated, the device is considered compromised and does not boot or boots with minimum functionality.

- Software images should be encrypted and keyed. This enables the Secure Bootloader to validate the software image prior to execution and prevents the software image from being copied for malicious purposes.

- Equipment must allow data ports to be enabled and disabled so unused ports are unavailable to persons in the proximity of the network equipment.

Consider networking equipment that is Federal Information Processing Standard (FIPS) 140-2 Level 2 validated.

FIPS 140-2 validation consists of four levels of increasing security.

- Level 1 (lowest) – Basic security requirements are specified for cryptographic module.

- Level 2 – Adds requirements for physical evidence of tampering, as well as role-based user authentication.

- Level 3 – Requires physical tampering resistance and stricter identity-based authentication.

- Level 4 (highest) – Adds even more physical security requirements and requires an even greater robustness to the platform, in order to hold up against environmental attacks.

Network Access Control

Network Access Control (NAC) is an essential security feature for wired and wireless networks, since it prevents unauthorised access and intrusion – external or internal – into managed networks. The result is the only right users or devices have access to the right information.

NAC tools are centralised policy and role-based tools, offering combined permissions auditing and management solution for administrators looking to secure their networks against authorised and unauthorised access. As a centralised tool, policy and role base profiles are managed and rapidly deployed across networks of any size.

Policy and role based should include:

- Access restrictions for time of day, day of week and location

- Personnel or device role (e.g. admin, user, guest, process controller)

- Work Group

- MAC Address of device through which access is initiated

A proven M2M communications network security strategy must go even further and protect data “in transit” as well. Even if an unauthorised device manages to gain access to the M2M communication network, it isn’t necessarily gaining access to the actual data without passing yet another layer of security.

Data Encryption

Data encryption is an essential part of any security strategy because it does not prevent unauthorised parties from intercepting a message, but encodes a message so only authorised parties can read it, which is a fundamental tenet for wireless networks.

Today, Advanced Encryption Standard (AES) with three keys lengths of 128, 192 and 256 bits is the industry default and used worldwide. As a US Federal Government standard and even used by the National Security Agency, AES can be trusted to protect sensitive information and maintain data privacy.

Wireless links should be encrypted using AES 128 at a minimum.

For a higher level of trust, consider networking equipment that is FIPS 140-2 Level 2 validated.

When a device is FIPS 140-2 validated, a known set of keys and test vectors are passed through the AES algorithm to validate the strength and completeness of the key generation and the encryption algorithm.

Overall, incorporating encryption is a way to ensure data privacy and is yet another way to layer security for information being communicated wirelessly.

Options for security policies and safeguards

The aforementioned access control and data encryption considerations create resilient and secure wireless networking and communication capabilities for critical infrastructure. However, an IIoT network security strategy also needs to address and implement policies that serve as safeguards, which make it difficult to circumvent security measures and limit the potential impact of a security breach.

Limitation of Permitted Activities

One method to implement safeguards is to limit permitted activities on the wireless network to only those absolutely required to perform or executed the assigned task. This is achieved by disabling ports not required such as TELNET, Port 23.

As an example, a wireless network primarily used for sensor data collection and remote command and control of devices should not allow a hacker that compromised the network to gain access to financial or other critical data. Such a limitation of permitted activities can be achieved through various means of security measures.

Firewalls and Packet Filtering

Packet Filtering and Firewalls based on packet filtering (executed in Layers 4 and lower) are essential features for IIoT devices. IIoT devices typically do not have the processing power for more sophisticated firewall schemes that require packet inspection and are performed at Layer 7.

Virtual Local Area Networks

Virtual Local Area Networks (VLANs) are used to separate the wireless network infrastructure and its management from the production network, devices and/or communication endpoints. By using VLAN’s, we see the introduction of another level of security, especially if combined with Quality of Service (QoS) mechanisms. Think of it as an emergency access to your wireless network infrastructure for remote management and control, in case a Denial of Service (DoS) attack overwhelms the actual payload and production network.

User Level Access

By implementing user-level access (password protected), network administrators provide personnel access to wireless network and devices to maintenance personnel, but limited to monitoring system health or performance without opening the system up to misuse because configuration and other privileges are reserved for a different user level and password.

Access limitation of local ports

The ability to control who is allowed access from local ports (e.g. through MAC address filtering) or even completely turning off local port access when they are not in use, making it essentially impossible (or at least very hard) for someone who gained physical access to your network infrastructure and devices to get connected and gain access to your private networks.

There are of course several additional safeguarding tactics and strategies worth considering, but these ideas are meant to provide a place from which to expand and adjust as needed.

Finally, in order to complete the M2M security approach, it takes vigilance.  Today’s M2M networks are not heuristic, self-healing, adaptive, self-optimising automatons.  They require an educated observer who is looking for anomalies, aberrations, outliers, exceptions and flat-out failures. M2M requires standards based protocols for determining the health of the network, integrity of the links and performance of the overlying applications.

Going forward with confidence

With the explosive growth of the IIoT market over the next 6 years in sensors, communication equipment (wired and wireless) and the applications to enable ever increasing levels of automation, electric utilities and companies in the energy sector must upgrade existing networks or deploy new networks with security at the forefront. While upgrading or implementing higher levels of security in IIoT and M2M networks, it is a double-edged sword.

- Can’t upgrade devices on a production network because it would disrupt a process

- A cyber-attack is going to disrupt the production network if it occurs.

Today, it is not a matter of “if” a cyber-attack is going to take place, but when.

The path forward is clear. Develop a cybersecurity plan that secures your expanding IIoT network, but understand threats that exist, and the services and features that are needed from your IIoT devices and networking equipment to lock down communications so they are available to the right persons or devices, when they need to be and can be managed as changes in policies or roles or processes dictate.

More Stories By Scott Allen

Scott is an executive leader with more than 25 years of experience in product lifecycle management, product marketing, business development, and technology deployment. He offers a unique blend of start-up aggressiveness and established company executive leadership, with expertise in product delivery, demand generation, and global market expansion. As CMO of FreeWave, Scott is responsible for product life cycle/management, GTM execution, demand generation, and brand creation/expansion strategies.

Prior to joining FreeWave, Scott held executive management positions at Fluke Networks (a Danaher Company), Network Associates (McAfee), and several start-ups including Mazu Networks and NEXVU Business Solutions. Scott earned his BA in Computer Information Systems from Weber University.

Latest Stories
As popularity of the smart home is growing and continues to go mainstream, technological factors play a greater role. The IoT protocol houses the interoperability battery consumption, security, and configuration of a smart home device, and it can be difficult for companies to choose the right kind for their product. For both DIY and professionally installed smart homes, developers need to consider each of these elements for their product to be successful in the market and current smart homes.
SYS-CON Events announced today that MIRAI Inc. will exhibit at the Japan External Trade Organization (JETRO) Pavilion at SYS-CON's 21st International Cloud Expo®, which will take place on Oct 31 – Nov 2, 2017, at the Santa Clara Convention Center in Santa Clara, CA. MIRAI Inc. are IT consultants from the public sector whose mission is to solve social issues by technology and innovation and to create a meaningful future for people.
In his general session at 21st Cloud Expo, Greg Dumas, Calligo’s Vice President and G.M. of US operations, will go over the new Global Data Protection Regulation and how Calligo can help business stay compliant in digitally globalized world. Greg Dumas is Calligo's Vice President and G.M. of US operations. Calligo is an established service provider that provides an innovative platform for trusted cloud solutions. Calligo’s customers are typically most concerned about GDPR compliance, applicatio...
Companies are harnessing data in ways we once associated with science fiction. Analysts have access to a plethora of visualization and reporting tools, but considering the vast amount of data businesses collect and limitations of CPUs, end users are forced to design their structures and systems with limitations. Until now. As the cloud toolkit to analyze data has evolved, GPUs have stepped in to massively parallel SQL, visualization and machine learning.
In his Opening Keynote at 21st Cloud Expo, John Considine, General Manager of IBM Cloud Infrastructure, will lead you through the exciting evolution of the cloud. He'll look at this major disruption from the perspective of technology, business models, and what this means for enterprises of all sizes. John Considine is General Manager of Cloud Infrastructure Services at IBM. In that role he is responsible for leading IBM’s public cloud infrastructure including strategy, development, and offering ...
As hybrid cloud becomes the de-facto standard mode of operation for most enterprises, new challenges arise on how to efficiently and economically share data across environments. In his session at 21st Cloud Expo, Dr. Allon Cohen, VP of Product at Elastifile, will explore new techniques and best practices that help enterprise IT benefit from the advantages of hybrid cloud environments by enabling data availability for both legacy enterprise and cloud-native mission critical applications. By rev...
SYS-CON Events announced today that Dasher Technologies will exhibit at SYS-CON's 21st International Cloud Expo®, which will take place on Oct 31 - Nov 2, 2017, at the Santa Clara Convention Center in Santa Clara, CA. Dasher Technologies, Inc. ® is a premier IT solution provider that delivers expert technical resources along with trusted account executives to architect and deliver complete IT solutions and services to help our clients execute their goals, plans and objectives. Since 1999, we'v...
SYS-CON Events announced today that NetApp has been named “Bronze Sponsor” of SYS-CON's 21st International Cloud Expo®, which will take place on Oct 31 – Nov 2, 2017, at the Santa Clara Convention Center in Santa Clara, CA. NetApp is the data authority for hybrid cloud. NetApp provides a full range of hybrid cloud data services that simplify management of applications and data across cloud and on-premises environments to accelerate digital transformation. Together with their partners, NetApp emp...
SYS-CON Events announced today that TidalScale, a leading provider of systems and services, will exhibit at SYS-CON's 21st International Cloud Expo®, which will take place on Oct 31 - Nov 2, 2017, at the Santa Clara Convention Center in Santa Clara, CA. TidalScale has been involved in shaping the computing landscape. They've designed, developed and deployed some of the most important and successful systems and services in the history of the computing industry - internet, Ethernet, operating s...
Join IBM November 1 at 21st Cloud Expo at the Santa Clara Convention Center in Santa Clara, CA, and learn how IBM Watson can bring cognitive services and AI to intelligent, unmanned systems. Cognitive analysis impacts today’s systems with unparalleled ability that were previously available only to manned, back-end operations. Thanks to cloud processing, IBM Watson can bring cognitive services and AI to intelligent, unmanned systems. Imagine a robot vacuum that becomes your personal assistant tha...
SYS-CON Events announced today that Massive Networks, that helps your business operate seamlessly with fast, reliable, and secure internet and network solutions, has been named "Exhibitor" of SYS-CON's 21st International Cloud Expo ®, which will take place on Oct 31 - Nov 2, 2017, at the Santa Clara Convention Center in Santa Clara, CA. As a premier telecommunications provider, Massive Networks is headquartered out of Louisville, Colorado. With years of experience under their belt, their team of...
Widespread fragmentation is stalling the growth of the IIoT and making it difficult for partners to work together. The number of software platforms, apps, hardware and connectivity standards is creating paralysis among businesses that are afraid of being locked into a solution. EdgeX Foundry is unifying the community around a common IoT edge framework and an ecosystem of interoperable components.
In his session at 21st Cloud Expo, Michael Burley, a Senior Business Development Executive in IT Services at NetApp, will describe how NetApp designed a three-year program of work to migrate 25PB of a major telco's enterprise data to a new STaaS platform, and then secured a long-term contract to manage and operate the platform. This significant program blended the best of NetApp’s solutions and services capabilities to enable this telco’s successful adoption of private cloud storage and launchi...
Infoblox delivers Actionable Network Intelligence to enterprise, government, and service provider customers around the world. They are the industry leader in DNS, DHCP, and IP address management, the category known as DDI. We empower thousands of organizations to control and secure their networks from the core-enabling them to increase efficiency and visibility, improve customer service, and meet compliance requirements.
SYS-CON Events announced today that IBM has been named “Diamond Sponsor” of SYS-CON's 21st Cloud Expo, which will take place on October 31 through November 2nd 2017 at the Santa Clara Convention Center in Santa Clara, California.