Welcome!

News Feed Item

Kenadyr Mining's second 2017 drill hole intersects 50 meters at 8.15 g/t Au at the East Zone from 151m to 201m depth in drill hole EZ-1-17

VANCOUVER, BRITISH COLUMBIA -- (Marketwired) -- 06/19/17 -- Kenadyr Mining (Holdings) Corp. (TSX VENTURE: KEN)(OTCQB: KNDYF)(FRANKFURT: KM0) (the "Corporation" or "Kenadyr") is pleased to announce that the second drill hole of the 2017 season, collared at the East Zone on Kenadyr's 100% owned Borubai License, Kyrgyz Republic, has intersected 50 meters at 8.15 g/t Au, from a downhole depth of 151 m to 201m.

The East Zone, as is the case with the previously drilled South Zone (40m @ 6.17 g/t Au in drill hole SZ-1-17), is directly adjacent to Zijin Mining Group Co Ltd.'s ("Zijin") Taldy Bulak Levoberejnyi (TBL) Mine, currently in production. The East Zone intersection, from drill hole EZ-1-17, is approximately 1 km from drill hole SZ-1-17, which was drilled in the South Zone. Zijin's TBL Deposit occurs directly between these two drill holes. Both drill holes encountered identical mineralization consisting of pervasive quartz-tourmaline-pyrite stockwork veining. This mineralization is consistent with the mineralization being mined at the TBL Deposit.

To view the map associated with this release, please visit the following link: http://media3.marketwire.com/docs/ken0619map.pdf.

Kenadyr's initial drilling was designed to intersect the various areas surrounding the TBL Mining Lease, which were previously drilled by the Soviets between 1970 and 1990, and where significant gold mineralization was reported. Subject to additional drilling results, Kenadyr's initial drill holes SZ-1-17 and EZ-1-17 confirm the presence of highly significant widespread gold mineralization reported historically by the Soviets, however these drill holes also encountered stronger and thicker mineralization than was previously reported from both the South Zone and the East Zone. These intersections confirm that significant widespread gold mineralization exists on Kenadyr's license directly adjacent to the TBL Mine, and that this mineralization continues in both directions along strike from the TBL Deposit.

The East Zone is open in two directions and to depth, and appears to directly connect to the TBL deposit. Core recovery for drill hole EZ-1-17 is greater than 99% and all intervals have been assayed using fire assay methods at an internationally accredited laboratory (ALS Global).

Drill Hole EZ-1-17 Assay Results are listed in the table below:


----------------------------------------------------------------------------
From                          To      Intervals (meters)        Grade Au g/t
----------------------------------------------------------------------------

151 m                      201 m               50 meters         8.15 g/t Au
including
161 m                      179 m               18 meters         12.8 g/t Au
----------------------------------------------------------------------------

The Corporation is confident that these intersections are approximate 'true widths'.

Kenadyr is in a strong position having a robust balance sheet, no debt nor significant payments owing, and a supportive institutional shareholder base. The management team has extensive in-country operational experience, and merger and acquisition expertise.

Dr. Alexander Becker, Kenadyr Chief Executive Officer, states, "These results from our second 2017 drill hole at Borubai have again exceeded our expectations. This latest drill hole, located on Kenadyr's license and drilled at the East Zone, demonstrates that highly significant gold mineralization also continues strongly to the East of the TBL Deposit, onto Kenadyr's License. Technical staff believe, based on the strength of the mineralization encountered in our first two 2017 drill holes that the mineralization being mined at the adjacent TBL Mine continues strongly in two directions along strike onto Kenadyr's Borubai License. As well, based on the geometry of the TBL deposit, the Corporation is confident that these intersections are approximate 'true widths'."

Kenadyr's Borubai project comprises a 100-per-cent-owned exploration license covering a contiguous 164-square-kilometre land package that encircles the Zijin/Kyrgyzaltyn newly constructed and operational TBL mine, in northern Kyrgyz Republic.

Zijin, the majority owner of the TBL mine, is one of China's largest gold producers, second-largest copper and zinc producer, as well as a major producer of tungsten and iron ore (source: Zijin website). According to a news release published by Zijin on Aug. 15, 2011, the national resources table of Kyrgyz Republic stated that the TBL field contains (C1 plus C2) 8,906,100 tonnes of gold ore (the average grade is 7.23 grams per tonne). The TBL mine is designed to produce 125,000 ounces of gold per annum. The TBL mine deposit is directly adjacent to Kenadyr's initial drill targets, the South Zone and East Zone, which were previously drilled by the Soviets, with drilling on the Borubai License exceeding 98,000 meters.

Readers are cautioned that the historical resource and reserve estimates relating to the TBL mine do not extend to the Borubai project. Kenadyr has not independently verified the information with respect to the TBL mine provided in this news release and it is not necessarily indicative of the mineralization on the Borubai project. Kenadyr is not aware of the resource and reserve categories, or the key assumptions, parameters and methods used to prepare the estimates on Zijin's TBL mine. The historical estimates on the TBL mine are not current mineral resources or mineral reserves as defined in National Instrument 43-101. Kenadyr considers the historical estimates on the TBL mine disclosed in this news release to be relevant to investors for the purpose of understanding Kenadyr's current drill program and exploration strategy.

Kenadyr's Borubai project, which surrounds the TBL mine, has been the subject of extensive historic exploration including drilling (98,200 metres in 184 diamond drill holes), trenching (13,800 cumulative metres), bulldozer cuts (33,400 cumulative metres), geologic mapping at 1:25,000 and 1:50,000 scales, ridge, spur and grid soil geochemistry for multi-elements (14,200 samples), rock geochemical sampling (2,320 samples), pan concentrate sampling (790 samples), 100 metres of adits, and 184 metres of underground raises. Additionally, the entire area has been subject to airborne magnetic, radiometric and gravity surveys, as well as ground-based resistivity and induced polarization surveys. Additional high grade gold targets exist throughout the Borubai license. The entire license has been subject to extensive geochemical and geophysical surveys, with follow up trenching and drilling on only a few of the identified anomalies.

Additional information in respect of the Corporation's business and the Borubai project is available in the Corporation's Annual Information Form dated April 28, 2017, available under the Corporation's profile on SEDAR.

Kenadyr has an expert team of mine developers with considerable local and regulatory knowledge, led by Chief Executive Officer Dr. Alex Becker, who has operated successfully in the country for much of the past 20 years. The board and management team includes; R. Stuart (Tookie) Angus (Chairman), Alexander Becker (Chief Executive Officer), Bryan Slusarchuk (President), Douglas J. Kirwin (Director), Brian Lueck (Director) and Kevin Ma (Chief Financial Officer). Mark Eaton will act as an adviser to the Corporation.

Brian Lueck, P. Geo, a director of Kenadyr and a qualified person as defined by National Instrument 43-101, has reviewed and approved the technical information in this news release.

On behalf of Kenadyr Mining (Holdings) Corp.

Dr. Alexander Becker, Chief Executive Officer and Director

For more information, visit www.kenadyr.com.

Neither the TSX Venture Exchange nor its regulation services provider (as that term is defined in the policies of the TSX Venture Exchange) accepts responsibility for the adequacy or accuracy of this release.

Cautionary Note Regarding Forward-Looking Statements

This news release contains forward-looking statements relating to the future operations of the Corporation and other statements that are not historical facts. Forward-looking statements are often identified by terms such as "will", "may", "should", "anticipate", "expects" and similar expressions. All statements other than statements of historical fact, included in this release, including, without limitation, statements regarding the future plans and objectives of the Corporation are forward-looking statements that involve risks and uncertainties. There can be no assurance that such statements will prove to be accurate and actual results and future events could differ materially from those anticipated in such statements. Important factors that could cause actual results to differ materially from the Corporation's expectations include the success for failure of the Corporation's proposed exploration activities on the Borubai Project or its resource potential relative to the TBL Mine and other risks detailed from time to time in the filings made by the Corporation with securities regulations.

The reader is cautioned that assumptions used in the preparation of any forward-looking information may prove to be incorrect. Events or circumstances may cause actual results to differ materially from those predicted, as a result of numerous known and unknown risks, uncertainties, and other factors, many of which are beyond the control of the Corporation. The reader is cautioned not to place undue reliance on any forward-looking information. Such information, although considered reasonable by management at the time of preparation, may prove to be incorrect and actual results may differ materially from those anticipated. Forward-looking statements contained in this news release are expressly qualified by this cautionary statement. The forward-looking statements contained in this news release are made as of the date of this news release and the Corporation will update or revise publicly any of the included forward-looking statements as expressly required by Canadian securities law.

Appendix: Assay intervals for drill holes SZ-1-17 and EZ-1-17

Hole SZ-1-17 (Significant Intervals)


----------------------------------------------------------------------------
                 No.                                             Au,    Rock
No.           Sample      from        to    length    weight     ppm    code
----------------------------------------------------------------------------
366             1736        to     639.0       1.0     3.130   2.418     BER
367             1737     639.0     640.0       1.0     3.670  10.575     BER
368             1738     640.0     641.0       1.0     4.100  28.643     BER
369             1739     641.0     642.0       1.0     3.010   4.759     BER
370             1740     642.0     642.0     Blank     3.060   0.057
371             1741     642.0     643.0       1.0     3.270  12.777     BER
372             1742     643.0     644.0       1.0     3.520   3.716     BER
373             1743     644.0     645.0       1.0     3.150   0.951     BER
374             1744     645.0     646.0       1.0     3.630   0.584     BER
375             1745     646.0     647.0       1.0     3.480   1.984     BER
376             1746     647.0     648.0       1.0     3.570   4.725     BER
377             1747     648.0     649.0       1.0     3.150    0.57     BER
378             1748     649.0     650.0       1.0     3.750    0.66     BER
379             1749     650.0     651.0       1.0     4.150    9.21     BER
380             1750     651.0     652.0       1.0     3.800    6.61     BER
381             1751     652.0     653.0       1.0     3.900   28.75     BER
382             1752     653.0     654.0       1.0     4.150    4.78     BER
383             1753     654.0     655.0       1.0     4.000    0.44     BER
384             1754     655.0     656.0       1.0     3.250    0.90     BER
385             1755     656.0     657.0       1.0     4.150    6.69   Q-TUR
386             1756     657.0     658.0       1.0     3.800    2.59   Q-TUR
387             1757     658.0     659.0       1.0     4.100    1.63   Q-TUR
388             1758     659.0     660.0       1.0     4.100    3.55   Q-TUR
389             1759     660.0     661.0       1.0     3.800    1.75   Q-TUR
390             1760     661.0     662.0       1.0     3.900    3.60   Q-TUR
391             1761     662.0     663.0       1.0     3.150    0.38   Q-TUR
392             1762     663.0     664.0       1.0     3.250    4.99   Q-TUR
393             1763     664.0     665.0       1.0     3.600    4.56   Q-TUR
394             1764     665.0     666.0       1.0     3.150    3.18   Q-TUR
395             1765     666.0     667.0       1.0     4.200    7.52   Q-TUR
396             1766     667.0     668.0       1.0     4.100   12.40   Q-TUR
397             1767     668.0     669.0       1.0     3.250    2.89   Q-TUR
398             1768     669.0     670.0       1.0     4.000   10.94   Q-TUR
399             1769     670.0     671.0       1.0     3.250    9.24   Q-TUR
400             1770     671.0     672.0       1.0     4.000    4.58   Q-TUR
401             1771     672.0     673.0       1.0     3.100   20.92   Q-TUR
402             1772     673.0     674.0       1.0     3.250    5.68   Q-TUR
403             1773     674.0     675.0       1.0     3.600    3.65   Q-TUR
404             1774     675.0     676.0       1.0     4.100    0.62   Q-TUR
405             1775     676.0     677.0       1.0     4.000    7.08   Q-TUR
406             1776     677.0     678.0       1.0     3.100    5.24   Q-TUR
407             1777     678.0     679.0       1.0     2.300    0.27       Q
408             1778     679.0     680.0       1.0     3.000    0.19       Q
409             1779     680.0     681.0       1.0     2.200    0.27     LIS
410             1780     681.0     681.0     Blank     3.000    less
                                                                than
                                                               0.050
411             1781     681.0     682.0       1.0     2.500    1.19     LIS
412             1782     682.0     683.0       1.0     3.000    0.24     LIS
413             1783     683.0     684.0       1.0     3.500    0.13     LIS
414             1784     684.0     685.0       1.0     3.000    0.27     LIS
415             1785     685.0     686.0       1.0     3.100    less     LIS
                                                                than
                                                               0.050
416             1786     686.0     687.0       1.0     2.700    less       Q
                                                                than
                                                               0.050
417             1787     687.0     688.0       1.0     3.400    0.87      DR
418             1788     688.0     689.0       1.0     3.500    0.06      DR
419             1789     689.0     690.0       1.0     2.500    less      DR
                                                                than
                                                               0.050
420             1790     690.0     691.0       1.0     2.200    less      DR
                                                                than
                                                               0.050
421             1791     691.0     692.0       1.0     3.100    less      DR
                                                                than
                                                               0.050
422             1792     692.0     693.0       1.0     3.000    0.06      DR
423             1793     693.0     694.0       1.0     3.200    0.33   Q-TUR
424             1794     694.0     695.0       1.0     4.000    0.41   Q-TUR
425             1795     695.0     696.0       1.0     3.100    1.86   Q-TUR
426             1796     696.0     697.0       1.0     3.250    0.24   Q-TUR
427             1797     697.0     698.0       1.0     3.100    0.05   Q-TUR
428             1798     698.0     699.0       1.0     4.000    less      MG
                                                                than
                                                               0.050
429             1799     699.0     700.0       1.0     3.600    less      MG
                                                                than
                                                               0.050
430             1800     700.0     701.0       1.0     3.500    less      MG
                                                                than
                                                               0.050
431             1801     701.0     702.0       1.0     4.000    less      MG
                                                                than
                                                               0.050
432             1802     702.0     703.0       1.0     3.600    less      MG
                                                                than
                                                               0.050
433             1803     703.0     704.0       1.0     4.000    less      MG
                                                                than
                                                               0.050
434             1804     704.0     705.0       1.0     4.000    less      MG
                                                                than
                                                               0.050
435             1805     705.0     706.0       1.0     4.120    less      MG
                                                                than
                                                               0.050
436             1806     706.0     707.0       1.0     4.250    0.10   Q-SER
437             1807     707.0     708.0       1.0     3.500    2.23   Q-SER
438             1808     708.0     709.0       1.0     4.250    0.94   Q-SER
439             1809     709.0     710.0       1.0     4.200    less   Q-SER
                                                                than
                                                               0.050
440             1810     710.0     711.0       1.0     4.100    0.06   Q-SER
441             1811     711.0     712.0       1.0     3.780    0.06     LIS
442             1812     712.0     713.0       1.0     4.250    less     LIS
                                                                than
                                                               0.050
443             1813     713.0     714.0       1.0     4.000    0.70   Q-SER
444             1814     714.0     715.0       1.0     4.000    1.64   Q-TUR
445             1815     715.0     716.0       1.0     3.500    1.52   Q-TUR
446             1816     716.0     717.0       1.0     4.000   14.94   Q-TUR
447             1817     717.0     718.0       1.0     4.250    7.47   Q-TUR
448             1818     718.0     719.0       1.0     4.250    3.49   Q-TUR
449             1819     719.0     720.0       1.0     3.635           Q-TUR

Hole EZ-1-17 (significant intervals)


----------------------------------------------------------------------------
              No.                                Au,     Au,     Au,    Rock
No.        Sample     from       to   length     ppm     ppm     ppm    code
----------------------------------------------------------------------------
1            1955    140.0    141.0      1.0    less                      MG
                                                than
                                               0.050
2            1956    141.0    142.0      1.0    less                   Q-SER
                                                than
                                               0.050
3            1957    142.0    143.0      1.0    less                     LIS
                                                than
                                               0.050
4            1958    143.0    144.0      1.0    less                     LIS
                                                than
                                               0.050
5            1959    144.0    145.0      1.0    less                     LIS
                                                than
                                               0.050
6            1960    145.0    146.0      1.0    less                     LIS
                                                than
                                               0.050
7            1961    146.0    147.0      1.0   0.061                     LIS
8            1962    147.0    148.0      1.0   0.087                     LIS
9            1963    148.0    149.0      1.0   0.140   0.140             BER
10           1964    149.0    150.0      1.0   0.723                     BER
11           1965    150.0    151.0      1.0   0.611                     BER
12           1966    151.0    152.0      1.0    18.8    18.8    14.1     BER
13           1967    152.0    153.0      1.0    10.3    10.7     9.6   Q-TUR
15           1968    153.0    154.0      1.0     7.9     6.4     7.1   Q-TUR
16           1969    154.0    155.0      1.0     7.1     6.1     6.9   Q-TUR
17           1970    155.0    156.0      1.0     3.4     2.4     2.6   Q-TUR
18           1971    156.0    157.0      1.0    2.27    2.27           Q-TUR
19           1972    157.0    158.0      1.0    4.71    4.25    4.48   Q-TUR
20           1973    158.0    159.0      1.0    3.46    3.12    2.28   Q-TUR
21           1974    159.0    160.0      1.0    2.95    1.98    2.31   Q-TUR
22           1975    160.0    161.0      1.0    5.20    4.49    4.33   Q-TUR
23           1976    161.0    162.0      1.0    13.0    20.3    19.7   Q-TUR
24           1977    162.0    163.0      1.0    9.06    7.92    7.94   Q-TUR
25           1978    163.0    164.0      1.0    2.28    3.71    3.05   Q-TUR
26           1979    164.0    165.0      1.0    4.94    6.63    6.74   Q-TUR
27           1980    165.0    166.0      1.0    7.60    8.84   11.13   Q-TUR
28           1981    166.0    167.0      1.0    17.1    17.8    14.2   Q-TUR
29           1982    167.0    168.0      1.0    23.7    24.5    23.8   Q-TUR
30           1983    168.0    169.0      1.0    34.5    39.1    39.1   Q-TUR
31           1984    169.0    170.0      1.0    17.5    14.6    14.5   Q-TUR
32           1985    170.0    171.0      1.0    4.66    3.93    3.54   Q-TUR
33           1986    171.0    172.0      1.0    4.53    4.41           Q-TUR
34           1987    172.0    173.0      1.0    12.0    11.7    10.9   Q-TUR
35           1988    173.0    174.0      1.0    4.46    4.05    4.05   Q-TUR
36           1989    174.0    175.0      1.0    3.07    3.51    3.50   Q-TUR
37           1990    175.0    176.0      1.0    16.6    17.5    16.4   Q-TUR
38           1991    176.0    177.0      1.0    15.2    16.9    15.4   Q-TUR
39           1992    177.0    178.0      1.0    7.50    7.73    6.81   Q-TUR
40           1993    178.0    179.0      1.0    19.0    17.1    16.7   Q-TUR
41           1994    179.0    180.0      1.0    5.37    4.95    4.76   Q-TUR
42           1995    180.0    180.0    BLANK    less   blank
                                                than
                                               0.050
43           1996    180.0    181.0      1.0    5.15    4.62    6.32   Q-TUR
44           1997    181.0    182.0      1.0    3.78    3.76    4.94   Q-TUR
45           1998    182.0    183.0      1.0    2.00    2.26    2.21   Q-TUR
46           1999    183.0    184.0      1.0    10.0    9.16    9.71   Q-TUR
47           2000    184.0    185.0      1.0    16.3    15.2    16.9   Q-TUR
48           2001    185.0    186.0      1.0    5.25    5.49           Q-TUR
49           2002    186.0    187.0      1.0    6.78    7.49           Q-TUR
50           2003    187.0    188.0      1.0    3.51                   Q-TUR
51           2004    188.0    189.0      1.0    6.47    6.99    6.17   Q-TUR
52           2005    189.0    190.0      1.0    22.6    23.2    23.7   Q-TUR
53           2006    190.0    191.0      1.0    6.16    5.94           Q-TUR
54           2007    191.0    192.0      1.0    2.52    2.51    2.82   Q-TUR
55           2008    192.0    193.0      1.0    2.22    2.16    2.02   Q-TUR
56           2009    193.0    194.0      1.0    1.71                   Q-TUR
57           2010    194.0    195.0      1.0    1.44                   Q-TUR
58           2011    195.0    196.0      1.0    2.83    2.55    2.49   Q-TUR
59           2012    196.0    197.0      1.0    1.05                   Q-TUR
60           2013    197.0    198.0      1.0    2.07    1.97    2.14   Q-TUR
61           2014    198.0    199.0      1.0    4.40    4.27    3.96   Q-TUR
62           2015    199.0    200.0      1.0    10.3    12.8    9.74   Q-TUR
63           2016    200.0    201.0      1.0    1.34                   Q-TUR
64           2017    201.0    202.0      1.0    1.08                   Q-TUR
65           2018    202.0    203.0      1.0   0.625                   Q-TUR
66           2019    203.0    204.0      1.0   0.506                   Q-TUR
67           2020    204.0    205.0      1.0   0.469                     BER
68           2021    205.0    206.0      1.0   0.298                     BER
69           2022    206.0    207.0      1.0   0.388                     BER
70           2023    207.0    208.0      1.0   0.323   0.333           Q-TUR
71           2024    208.0    209.0      1.0   0.364                   Q-TUR
72           2025    209.0    210.0      1.0   0.616                   Q-TUR
73           2026    210.0    211.0      1.0   0.073                     AMF
74           2027    211.0    212.0      1.0    less    less   blank     AMF
                                                than    than
                                               0.050   0.050
75           2028    212.0    213.0      1.0    5.85    5.59    5.86     BER
76           2029    213.0    214.0      1.0    2.67    2.51    2.53     BER
77           2030    214.0    215.0      1.0   0.603                     BER
78           2031    215.0    216.0      1.0   0.646                     BER

Please note that the three "Au, ppm" columns show the initial assay values in the first column from the left, and check or repeat assays of the same sample in the second and third columns.

To view the appendix associated with this release, please visit the following link: http://media3.marketwire.com/docs/ken0619appendix.pdf.

More Stories By Marketwired .

Copyright © 2009 Marketwired. All rights reserved. All the news releases provided by Marketwired are copyrighted. Any forms of copying other than an individual user's personal reference without express written permission is prohibited. Further distribution of these materials is strictly forbidden, including but not limited to, posting, emailing, faxing, archiving in a public database, redistributing via a computer network or in a printed form.

Latest Stories
"Loom is applying artificial intelligence and machine learning into the entire log analysis process, from start to finish and at the end you will get a human touch,” explained Sabo Taylor Diab, Vice President, Marketing at Loom Systems, in this SYS-CON.tv interview at 20th Cloud Expo, held June 6-8, 2017, at the Javits Center in New York City, NY.
@DevOpsSummit at Cloud Expo taking place Oct 31 - Nov 2, 2017, at the Santa Clara Convention Center, Santa Clara, CA, is co-located with the 21st International Cloud Expo and will feature technical sessions from a rock star conference faculty and the leading industry players in the world. The widespread success of cloud computing is driving the DevOps revolution in enterprise IT. Now as never before, development teams must communicate and collaborate in a dynamic, 24/7/365 environment. There is ...
SYS-CON Events announced today that Datanami has been named “Media Sponsor” of SYS-CON's 21st International Cloud Expo, which will take place on Oct 31 – Nov 2, 2017, at the Santa Clara Convention Center in Santa Clara, CA. Datanami is a communication channel dedicated to providing insight, analysis and up-to-the-minute information about emerging trends and solutions in Big Data. The publication sheds light on all cutting-edge technologies including networking, storage and applications, and the...
After more than five years of DevOps, definitions are evolving, boundaries are expanding, ‘unicorns’ are no longer rare, enterprises are on board, and pundits are moving on. Can we now look at an evolution of DevOps? Should we? Is the foundation of DevOps ‘done’, or is there still too much left to do? What is mature, and what is still missing? What does the next 5 years of DevOps look like? In this Power Panel at DevOps Summit, moderated by DevOps Summit Conference Chair Andi Mann, panelists loo...
SYS-CON Events announced today that EnterpriseTech has been named “Media Sponsor” of SYS-CON's 21st International Cloud Expo, which will take place on Oct 31 – Nov 2, 2017, at the Santa Clara Convention Center in Santa Clara, CA. EnterpriseTech is a professional resource for news and intelligence covering the migration of high-end technologies into the enterprise and business-IT industry, with a special focus on high-tech solutions in new product development, workload management, increased effi...
You know you need the cloud, but you’re hesitant to simply dump everything at Amazon since you know that not all workloads are suitable for cloud. You know that you want the kind of ease of use and scalability that you get with public cloud, but your applications are architected in a way that makes the public cloud a non-starter. You’re looking at private cloud solutions based on hyperconverged infrastructure, but you’re concerned with the limits inherent in those technologies.
For organizations that have amassed large sums of software complexity, taking a microservices approach is the first step toward DevOps and continuous improvement / development. Integrating system-level analysis with microservices makes it easier to change and add functionality to applications at any time without the increase of risk. Before you start big transformation projects or a cloud migration, make sure these changes won’t take down your entire organization.
Cloud promises the agility required by today’s digital businesses. As organizations adopt cloud based infrastructures and services, their IT resources become increasingly dynamic and hybrid in nature. Managing these require modern IT operations and tools. In his session at 20th Cloud Expo, Raj Sundaram, Senior Principal Product Manager at CA Technologies, will discuss how to modernize your IT operations in order to proactively manage your hybrid cloud and IT environments. He will be sharing bes...
A look across the tech landscape at the disruptive technologies that are increasing in prominence and speculate as to which will be most impactful for communications – namely, AI and Cloud Computing. In his session at 20th Cloud Expo, Curtis Peterson, VP of Operations at RingCentral, highlighted the current challenges of these transformative technologies and shared strategies for preparing your organization for these changes. This “view from the top” outlined the latest trends and developments i...
Automation is enabling enterprises to design, deploy, and manage more complex, hybrid cloud environments. Yet the people who manage these environments must be trained in and understanding these environments better than ever before. A new era of analytics and cognitive computing is adding intelligence, but also more complexity, to these cloud environments. How smart is your cloud? How smart should it be? In this power panel at 20th Cloud Expo, moderated by Conference Chair Roger Strukhoff, paneli...
SYS-CON Events announced today that MobiDev, a client-oriented software development company, will exhibit at SYS-CON's 21st International Cloud Expo®, which will take place October 31-November 2, 2017, at the Santa Clara Convention Center in Santa Clara, CA. MobiDev is a software company that develops and delivers turn-key mobile apps, websites, web services, and complex software systems for startups and enterprises. Since 2009 it has grown from a small group of passionate engineers and business...
Hardware virtualization and cloud computing allowed us to increase resource utilization and increase our flexibility to respond to business demand. Docker Containers are the next quantum leap - Are they?! Databases always represented an additional set of challenges unique to running workloads requiring a maximum of I/O, network, CPU resources combined with data locality.
SYS-CON Events announced today that GrapeUp, the leading provider of rapid product development at the speed of business, will exhibit at SYS-CON's 21st International Cloud Expo®, which will take place October 31-November 2, 2017, at the Santa Clara Convention Center in Santa Clara, CA. Grape Up is a software company, specialized in cloud native application development and professional services related to Cloud Foundry PaaS. With five expert teams that operate in various sectors of the market acr...
SYS-CON Events announced today that Ayehu will exhibit at SYS-CON's 21st International Cloud Expo®, which will take place on October 31 - November 2, 2017 at the Santa Clara Convention Center in Santa Clara California. Ayehu provides IT Process Automation & Orchestration solutions for IT and Security professionals to identify and resolve critical incidents and enable rapid containment, eradication, and recovery from cyber security breaches. Ayehu provides customers greater control over IT infras...
Artificial intelligence, machine learning, neural networks. We’re in the midst of a wave of excitement around AI such as hasn’t been seen for a few decades. But those previous periods of inflated expectations led to troughs of disappointment. Will this time be different? Most likely. Applications of AI such as predictive analytics are already decreasing costs and improving reliability of industrial machinery. Furthermore, the funding and research going into AI now comes from a wide range of com...