Welcome!

Related Topics: @CloudExpo, Java IoT, Containers Expo Blog

@CloudExpo: Blog Feed Post

How Memory Leaks Happen in a Java Application | @CloudExpo #JVM #Java #Virtualization

One of the core benefits of Java is the JVM, which is an out-of-the-box memory management

How Memory Leaks Happen in a Java Application
By Eugen Paraschiv

Introduction to Memory Leaks In Java Apps
One of the core benefits of Java is the JVM, which is an out-of-the-box memory management. Essentially, we can create objects and the Java Garbage Collector will take care of allocating and freeing up memory for us.

Nevertheless, memory leaks can still occur in Java applications.

In this article, we're going to describe the most common memory leaks, understand their causes, and look at a few techniques to detect/avoid them. We're also going to use the Java YourKit profiler throughout the article, to analyze the state of our memory at runtime.

1. What is a Memory Leak in Java?
The standard definition of a memory leak is a scenario that occurs when objects are no longer being used by the application, but the Garbage Collector is unable to remove them from working memory - because they're still being referenced. As a result, the application consumes more and more resources - which eventually leads to a fatal OutOfMemoryError.

For a better understanding of the concept, here's a simple visual representation:

How memory leaks happen in Java

As we can see, we have two types of objects - referenced and unreferenced; the Garbage Collector can remove objects that are unreferenced. Referenced objects won't be collected, even if they're actually not longer used by the application.

Detecting memory leaks can be difficult. A number of tools perform static analysis to determine potential leaks, but these techniques aren't perfect because the most important aspect is the actual runtime behavior of the running system.

So, let's have a focused look at some of the standard practices of preventing memory leaks, by analyzing some common scenarios.

2. Java Heap Leaks
In this initial section, we're going to focus on the classic memory leak scenario - where Java objects are continuously created without being released.

An advantageous technique to understand these situations is to make reproducing a memory leak easier by setting a lower size for the Heap. That's why, when starting our application, we can adjust the JVM to suit our memory needs:

-Xms<size>

-Xmx<size>

These parameters specify the initial Java Heap size as well as the maximum Heap size.

2.1. Static Field Holding On to the Object Reference
The first scenario that might cause a Java memory leak is referencing a heavy object with a static field.

Let's have a look at a quick example:

private Random random = new Random();
public static final ArrayList<Double> list = new ArrayList<Double>(1000000);

@Test
public void givenStaticField_whenLotsOfOperations_thenMemoryLeak() throws InterruptedException {
for (int i = 0; i < 1000000; i++) {
list.add(random.nextDouble());
}

System.gc();
Thread.sleep(10000); // to allow GC do its job
}

We created our ArrayList as a static field - which will never be collected by the JVM Garbage Collector during the lifetime of the JVM process, even after the calculations it was used for are done. We also invoked Thread.sleep(10000) to allow the GC to perform a full collection and try to reclaim everything that can be reclaimed.

Let's run the test and analyze the JVM with our profiler:

Java static memory leak

Notice how, at the very beginning, all memory is, of course, free.

Then, in just 2 seconds, the iteration process runs and finishes - loading everything into the list (naturally this will depend on the machine you're running the test on).

After that, a full garbage collection cycle is triggered, and the test continues to execute, to allow this cycle time to run and finish. As you can see, the list is not reclaimed and the memory consumption doesn't go down.

Let's now see the exact same example, only this time, the ArrayList isn't referenced by a static variable. Instead, it's a local variable that gets created, used and then discarded:

@Test
public void givenNormalField_whenLotsOfOperations_thenGCWorksFine() throws InterruptedException {
addElementsToTheList();
System.gc();
Thread.sleep(10000); // to allow GC do its job
}

private void addElementsToTheList(){
ArrayList<Double> list = new ArrayList<Double>(1000000);
for (int i = 0; i < 1000000; i++) {
list.add(random.nextDouble());
}
}

Once the method finishes its job, we'll observe the major GC collection, around 50th second on the image below:

Java static no memory leak

Notice how the GC is now able to reclaim some of the memory utilized by the JVM.

How to prevent it?
Now that you understand the scenario, there are of course ways to prevent it from occurring.

First, we need to pay close attention to our usage of static; declaring any collection or heavy object as static ties its lifecycle to the lifecycle of the JVM itself, and makes the entire object graph impossible to collect.

We also need to be aware of collections in general - that's a common way to unintentionally hold on to references for longer than we need to.

2.2. Calling String.intern() on Long String
The second group of scenarios that frequently causes memory leaks involves String operations - specifically the String.intern() API.

Let's have a look at a quick example:

@Test
public void givenLengthString_whenIntern_thenOutOfMemory()
throws IOException, InterruptedException {
Thread.sleep(15000);

String str
= new Scanner(new File("src/test/resources/large.txt"), "UTF-8")
.useDelimiter("\\A").next();
str.intern();

System.gc();
Thread.sleep(15000);
}

Here, we simply try to load a large text file into running memory and then return a canonical form, using .intern().

The intern API will place the str String in the JVM memory pool - where it can't be collected - and again, this will cause the GC to be unable to free up enough memory:

Java String intern memory leak

We can clearly see that in the first 15th seconds JVM is stable, then we load the file and JVM perform garbage collection (20th second).

Finally, the str.intern() is invoked, which leads to the memory leak - the stable line indicating high heap memory usage, which will never be released.

How to prevent it?
Please remember that interned String objects are stored in PermGen space - if our application is intended to perform a lot of operations on large strings, we might need to increase the size of the permanent generation:

-XX:MaxPermSize=<size>

The second solution is to use Java 8 - where the PermGen space is replaced by the Metaspace - which won't lead to any OutOfMemoryError when using intern on Strings:

Finally, there are also several options of avoiding the .intern() API on Strings as well.

2.3. Unclosed Streams
Forgetting to close a stream is a very common scenario, and certainly, one that most developers can relate to. The problem was partially removed in Java 7 when the ability to automatically close all types of streams was introduced into the try-with-resource clause.

Why partially? Because the try-with-resources syntax is optional:

@Test(expected = OutOfMemoryError.class)
public void givenURL_whenUnclosedStream_thenOutOfMemory()
throws IOException, URISyntaxException {
String str = "";
URLConnection conn
= new URL("http://norvig.com/big.txt").openConnection();
BufferedReader br = new BufferedReader(
new InputStreamReader(conn.getInputStream(), StandardCharsets.UTF_8));

while (br.readLine() != null) {
str += br.readLine();
}

//
}

Let's see how the memory of the application looks when loading a large file from an URL:

Java unclosed streams memory leak

As we can see, the heap usage is gradually increasing over time - which is the direct impact of the memory leak caused by not closing the stream.

How to prevent it?
We always need to remember to close streams manually, or to make a use of the auto-close feature introduced in Java 8:

try (BufferedReader br = new BufferedReader(
new InputStreamReader(conn.getInputStream(), StandardCharsets.UTF_8))) {
// further implementation
} catch (IOException e) {
e.printStackTrace();
}

In this case, the BufferedReader will be automatically closed at the end of the try statement, without the need to close it in an explicit finally block.

2.4. Unclosed Connections
This scenario is quite similar to the previous one, with the primary difference of dealing with unclosed connections (e.g. to a database, to an FTP server, etc.). Again, improper implementation can do a lot of harm, leading to memory problems.

Let's see a quick example:

@Test(expected = OutOfMemoryError.class)
public void givenConnection_whenUnclosed_thenOutOfMemory()
throws IOException, URISyntaxException {

URL url = new URL("ftp://speedtest.tele2.net");
URLConnection urlc = url.openConnection();
InputStream is = urlc.getInputStream();
String str = "";

//
}

The URLConnection remains open, and the result is, predictably, a memory leak:

Java unclosed connections memory leak

Notice how the Garbage Collector cannot do anything to release unused, but referenced memory. The situation is immediately clear after the 1st minute - the number of GC operations rapidly decreases, causing increased Heap memory use, which leads to the OutOfMemoryError.

How to prevent it?
The answer here is simple - we need to always close connections in a disciplined manner.

2.5. Adding Objects with no hashCode() and equals() into a HashSet
A simple but very common example that can lead to a memory leak is to use a HashSet with objects that are missing their hashCode() or equals() implementations.

Specifically, when we start adding duplicate objects into a Set - this will only ever grow, instead of ignoring duplicates as it should. We also won't be able to remove these objects, once added.

Let's create a simple class without either equals or hashCode:

public class Key {
public String key;

public Key(String key) {
Key.key = key;
}
}

Now, let's see the scenario:

@Test(expected = OutOfMemoryError.class)
public void givenMap_whenNoEqualsNoHashCodeMethods_thenOutOfMemory()
throws IOException, URISyntaxException {
Map<Object, Object> map = System.getProperties();
while (true) {
map.put(new Key("key"), "value");
}
}

This simple implementation will lead to the following scenario at runtime:

Java no hascode equals memory leak

Notice how the garbage collector stopped being able to reclaim memory around 1:40, and notice the memory leak; the number of GC collections dropped almost four times immediately after.

How to prevent it?
In these situations, the solution is simple - it's crucial to provide the hashCode() and equals() implementations.

One tool worth mentioning here is Project Lombok - this provides a lot of default implementation by annotations, e.g. @EqualsAndHashCode.

3. How to Find Leaking Sources in Your Application
Diagnosing memory leaks is a lengthy process that requires a lot of practical experience, debugging skills and detailed knowledge of the application.

Let's see which techniques can help you in addition to standard profiling.

3.1. Verbose Garbage Collection
One of the quickest ways to identify a memory leak is to enable verbose garbage collection.

By adding the -verbose:gc parameter to the JVM configuration of our application, we're enabling a very detailed trace of GC. Summary reports are shown in default error output file, which should help you understand how your memory is being managed.

3.2. Do Profiling
The second technique is the one we've been using throughout this article - and that's profiling. The most popular profiler is Visual VM - which is a good place to start moving past command-line JDK tools and into lightweight profiling.

In this article, we used another profiler - YourKit - which has some additional, more advanced features compared to Visual VM.

3.3. Review Your Code
Finally, this is more of a general good practice than a specific technique to deal with memory leaks.

Simply put - review your code thoroughly, practice regular code reviews and make good use of static analysis tools to help you understand your code and your system.

Conclusion
In this tutorial, we had a practical look at how memory leaks happen on the JVM. Understanding how these scenarios happen is the first step in the process of dealing with them.

Then, having the techniques and tools to really see what's happening at runtime, as the leak occurs, is critical as well. Static analysis and careful code-focused reviews can only do so much, and - at the end of the day - it's the runtime that will show you the more complex leaks that aren't immediately identifiable in the code.

Finally, leaks can be notoriously hard to find and reproduce because many of them only happen under intense load, which generally happens in production. This is where you need to go beyond code-level analysis and work on two main aspects - reproduction and early detection.

The best and most reliable way to reproduce memory leaks is to simulate the usage patterns of a production environment as close as possible, with the help of a good suite of performance tests.

And early detection is where a solid performance management solution and even an early detection solution can make a significant difference, as it's the only way to have the necessary insight into the runtime of your application in production.

The full implementation of this tutorial can be found over on GitHub. This is a Maven based project, so it can simply be imported and run as it is.

The post How Memory Leaks Happen in a Java Application appeared first on Stackify.

Read the original blog entry...

More Stories By Stackify Blog

Stackify offers the only developers-friendly solution that fully integrates error and log management with application performance monitoring and management. Allowing you to easily isolate issues, identify what needs to be fixed quicker and focus your efforts – Support less, Code more. Stackify provides software developers, operations and support managers with an innovative cloud based solution that gives them DevOps insight and allows them to monitor, detect and resolve application issues before they affect the business to ensure a better end user experience. Start your free trial now stackify.com

Latest Stories
The best way to leverage your Cloud Expo presence as a sponsor and exhibitor is to plan your news announcements around our events. The press covering Cloud Expo and @ThingsExpo will have access to these releases and will amplify your news announcements. More than two dozen Cloud companies either set deals at our shows or have announced their mergers and acquisitions at Cloud Expo. Product announcements during our show provide your company with the most reach through our targeted audiences.
DXWorldEXPO LLC announced today that Telecom Reseller has been named "Media Sponsor" of CloudEXPO | DXWorldEXPO 2018 New York, which will take place on November 11-13, 2018 in New York City, NY. Telecom Reseller reports on Unified Communications, UCaaS, BPaaS for enterprise and SMBs. They report extensively on both customer premises based solutions such as IP-PBX as well as cloud based and hosted platforms.
Enterprises are striving to become digital businesses for differentiated innovation and customer-centricity. Traditionally, they focused on digitizing processes and paper workflow. To be a disruptor and compete against new players, they need to gain insight into business data and innovate at scale. Cloud and cognitive technologies can help them leverage hidden data in SAP/ERP systems to fuel their businesses to accelerate digital transformation success.
When building large, cloud-based applications that operate at a high scale, it's important to maintain a high availability and resilience to failures. In order to do that, you must be tolerant of failures, even in light of failures in other areas of your application. "Fly two mistakes high" is an old adage in the radio control airplane hobby. It means, fly high enough so that if you make a mistake, you can continue flying with room to still make mistakes. In his session at 18th Cloud Expo, Le...
Machine learning provides predictive models which a business can apply in countless ways to better understand its customers and operations. Since machine learning was first developed with flat, tabular data in mind, it is still not widely understood: when does it make sense to use graph databases and machine learning in combination? This talk tackles the question from two ends: classifying predictive analytics methods and assessing graph database attributes. It also examines the ongoing lifecycl...
Transformation Abstract Encryption and privacy in the cloud is a daunting yet essential task for both security practitioners and application developers, especially as applications continue moving to the cloud at an exponential rate. What are some best practices and processes for enterprises to follow that balance both security and ease of use requirements? What technologies are available to empower enterprises with code, data and key protection from cloud providers, system administrators, inside...
Daniel Jones is CTO of EngineerBetter, helping enterprises deliver value faster. Previously he was an IT consultant, indie video games developer, head of web development in the finance sector, and an award-winning martial artist. Continuous Delivery makes it possible to exploit findings of cognitive psychology and neuroscience to increase the productivity and happiness of our teams.
Consumer-driven contracts are an essential part of a mature microservice testing portfolio enabling independent service deployments. In this presentation we'll provide an overview of the tools, patterns and pain points we've seen when implementing contract testing in large development organizations.
To Really Work for Enterprises, MultiCloud Adoption Requires Far Better and Inclusive Cloud Monitoring and Cost Management … But How? Overwhelmingly, even as enterprises have adopted cloud computing and are expanding to multi-cloud computing, IT leaders remain concerned about how to monitor, manage and control costs across hybrid and multi-cloud deployments. It’s clear that traditional IT monitoring and management approaches, designed after all for on-premises data centers, are falling short in ...
The deluge of IoT sensor data collected from connected devices and the powerful AI required to make that data actionable are giving rise to a hybrid ecosystem in which cloud, on-prem and edge processes become interweaved. Attendees will learn how emerging composable infrastructure solutions deliver the adaptive architecture needed to manage this new data reality. Machine learning algorithms can better anticipate data storms and automate resources to support surges, including fully scalable GPU-c...
Adding public cloud resources to an existing application can be a daunting process. The tools that you currently use to manage the software and hardware outside the cloud aren’t always the best tools to efficiently grow into the cloud. All of the major configuration management tools have cloud orchestration plugins that can be leveraged, but there are also cloud-native tools that can dramatically improve the efficiency of managing your application lifecycle. In his session at 18th Cloud Expo, ...
When applications are hosted on servers, they produce immense quantities of logging data. Quality engineers should verify that apps are producing log data that is existent, correct, consumable, and complete. Otherwise, apps in production are not easily monitored, have issues that are difficult to detect, and cannot be corrected quickly. Tom Chavez presents the four steps that quality engineers should include in every test plan for apps that produce log output or other machine data. Learn the ste...
Using new techniques of information modeling, indexing, and processing, new cloud-based systems can support cloud-based workloads previously not possible for high-throughput insurance, banking, and case-based applications. In his session at 18th Cloud Expo, John Newton, CTO, Founder and Chairman of Alfresco, described how to scale cloud-based content management repositories to store, manage, and retrieve billions of documents and related information with fast and linear scalability. He addresse...
A valuable conference experience generates new contacts, sales leads, potential strategic partners and potential investors; helps gather competitive intelligence and even provides inspiration for new products and services. Conference Guru works with conference organizers to pass great deals to great conferences, helping you discover new conferences and increase your return on investment.
Poor data quality and analytics drive down business value. In fact, Gartner estimated that the average financial impact of poor data quality on organizations is $9.7 million per year. But bad data is much more than a cost center. By eroding trust in information, analytics and the business decisions based on these, it is a serious impediment to digital transformation.