Blog Feed Post

Integration Testing in an Enterprise DevOps Environment

Stages of Development Testing

The need for testing a new piece of software before it’s released to customers is as old as software development itself. However, it’s typically left up to the individual organization to determine what types of testing need to be done, and how thorough the testing needs to be. The testing methodology and procedures can be left to individuals supporting each respective development team within an enterprise, causing scenarios where the right hand is unaware of what the left hand is doing. This will continue until at some point, things go horribly wrong. Then management is required to step in, and demand more effective testing. Developers then struggle to increase test effectiveness with their limited resources. The result is a constant balancing act between spending enough hours to test effectively without missing deadlines.

Testers are frequently looked at as merely a second line of defense to catch issues the developers miss. Because of this mindset, the sad reality of testing is that when budgets become strained, it is often the first area to be trimmed, or in many cases completely cut. With this reality in mind, we are always looking for ways to improve testing efficiency, which we take a look at in this article.

Who Carries out Integration Testing

When people typically think of testing enterprise scale software, they will typically envision a group of dedicated testers, hammering the newly developed software with a barrage of tests to expose its flaws and weaknesses. While an enterprise DevOps team may have a team of testers, they are not necessarily the only ones running tests.

In a DevOps environment, the responsibility of testing falls on developers, testers, and a variety of other team members. However, each of these respective groups is generally responsible for different stages of testing. For example, developers will perform both unit testing, and integration testing. Dedicated Testers will perform Systems Test, and various types of user groups perform User Acceptance tests.


Integration Testing V Model


Purpose of Integration Testing
Exploring every stage of testing would require a much longer article, so here we’ll focus primarily on Integration testing in a DevOps environment. We’ll start with a simplified definition.

Integration Testing: The testing of a component or module of code to ensure it integrates correctly with other components or modules of code.

Integration Testing Moduleshttp://www.plutora.com/wp-content/uploads/2018/01/Integration-Testing-Mo... 768w, http://www.plutora.com/wp-content/uploads/2018/01/Integration-Testing-Mo... 804w" sizes="(max-width: 300px) 100vw, 300px" />
When we talk about integrating one component with another, we are talking about making sure that the two segments fit together correctly and communicate data correctly between each other. Using our illustrated example, the search function (module #1) sends user defined search criteria to module #2 via XML. This second module then translates that, and creates the search parameters to send on to the database via JDBC.

The challenge with integration testing is that when you have multiple developers simultaneously developing multiple modules, you can’t test how two or more modules integrate together until all the modules are ready… or can you?

The answer is yes. There are different methods of integration testing that can be useful when testing integration of various modules of a product.

Types of Integration Testing

Big Bang Testing – This method waits until all modules of a given product are completed before any integration testing is carried out. Using the example in the image above, your new product under development has been split into six modules to maximize developer resources. With Big Bang testing, you would have to wait for all six modules to be completed before even starting integration testing.

This type of testing can be both cost and resource intensive, because the reality is that some modules will be completed long before others. Causing some of your developers to be unproductive while waiting until the last module is completed, then scramble again when it’s finally time to test. Then when an issue is inevitably discovered, it is far more difficult and time intensive to track the issue down to the specific segment of code that needs to be fixed.

Incremental Testing – Using our same example of six total modules for a given product, when two connecting modules are completed, they can be integrated together and tested to make sure that the data being communicated is exactly what is expected.

While this type of testing is clearly more efficient, there is another form of Incremental testing that is even more efficient yet. When development of the Search function is completed, instead of waiting for module #2 to be completed (to translate the search criteria into a JDBC database query) the developer can create a Stub to test the Search function against. Testing against stubs and drivers does not mean that further issues will not arise as modules are further integrated and further tested; problem code is identified and corrected in efficient stages, rather than in one final panicked rush.

  • Stub – A Stub is a small segment of code that simulates the response of the connecting lower level module. Using our example from the above diagram, it would receive the user defined search criteria from the Search module and provide a simple pre-defined response, or set of responses that would simulate what might be sent back from the database.
  • Driver – A Driver is similar to a Stub, but it simulates the data response of a connecting higher level, or parent module. Using our example from the diagram above, if the middleware component was completed first, a driver would simulate the sending of user defined search criteria, and also the receipt of the search results.

In a DevOps environment, Incremental testing is typically the preferred method of testing because it offers the most efficient use of development and testing resources. Tests can be carried out on a module as soon as development on it is completed. Developers can typically test it very quickly against their stubs and drivers, making any necessary corrections to the code for the module on the spot.

Top Down Testing – This form of testing involves testing the high level or parent module(s) first, then testing lower level or child modules as development is completed and they are integrated. Stubs are used to simulate the data response of lower level modules until they are completed and integrated.

Bottom Up Testing – Lower level modules are tested first to insure the individual modules are working correctly before they are integrated with their parent module. Drivers are used to simulate the parent modules data response until the development of the parent module is completed and integrated.

Regression Testing

Anytime a development team performs any type of iterative development or issue resolution, testing needs to be done. Not just testing for the results of that one change, but testing to make sure that the change didn’t inadvertently break or change expected results elsewhere in the application.

To ensure that these other areas of the application are still functioning correctly, every aspect of the application needs to be re-tested to ensure it’s functioning as designed. This end-to-end precautionary testing is called regression testing.

Because full regression testing should be completed for each release, it can be very repetitive, as well as time and resource intensive to manually execute the full test case for every conceivable scenario, and every application module. This is where automated testing tools earn their value. That said, we will discuss Regression Testing in much more detail in a future article.

Integration Testing in an Enterprise DevOps Environment

Even attempting to identify and discuss every possible factor for every possible DevOps scenario is a ludicrous venture. Our objective here is to provide some solutions and tools to consider to increase the efficiency of your integration testing. For additional information, a great eBook to include in your reading on this subject is A Practical Guide to Testing in DevOps, written by Katrina Clokie.

In an Agile or DevOps environment where continuous delivery pipelines are common, integration testing should be carried out as each module is completed or adjusted. For example, in many continuous delivery pipeline environments, it’s not uncommon to have multiple code deployments per developer per day. Running a quick set of integration tests at the end of each development phase prior to deployment should be a standard practice in this type of environment.

To efficiently test in this manner, the new component must either be tested against existing completed modules in a dedicated test environment or against Stubs and Drivers. Depending on your needs, it’s generally a good idea to keep a library of Stubs and Drivers for each application module in a folder or library to enable quick repetitive Integration testing use. Keeping Stubs and Drivers organized like this makes it easy to perform iterative changes, keeping them updated and performing optimally to meet your ongoing testing needs.

Another option to consider is a solution originally developed around 2002, called Service Virtualization. This creates a virtual environment, simulating module interaction with existing resources for testing purposes in a complex enterprise DevOps or Agile environment.


Wikipedia: Service virtualization emulates the behavior of software components to remove dependency constraints on development and testing teams. Such constraints occur in complex, interdependent environments when a component connected to the application under test is:

  • Not yet completed
  • Still evolving
  • Controlled by a third-party or partner
  • Available for testing only in limited capacity or at inconvenient times
  • Difficult to provision or configure in a test environment
  • Needed for simultaneous access by different teams with varied test data setup and other requirements
  • Restricted or costly to use for load and performance testing


Selenium is an excellent tool to use to automate test scripts. Anytime you are testing a given module or functionality repeatedly, it’s time to consider automating the test. Automated testing is especially useful for regression testing. Regression testing of a large application with many modules can be very time intensive. By automating those tests, test scripts are executed in a fraction of the time. It’s a tool that is well worth the investment.

In any development cycle, bugs and issues inevitably arise. To manage these over many developers and teams, you should consider using a good issue tracking software to record, track, and manage the reported issues throughout the lifecycle of issue resolution. Jira and Remedy are both great solutions for issue tracking and have a long history of refinement.

Integration Testing Keystone
Plutora Test is a keystone solution to any enterprise Agile or DevOps team. It allows you to easily create and manage test plans across multiple geographic locations. Additionally, it integrates each of the tools mentioned above into one cohesive solution. Its built in APIs can integrate directly with tools like Selenium, Jira, Remedy and thousands of others. Then, to make everything transparent to stakeholders, it takes the information collected from each of these tools, and rolls it up into an intelligent and customizable reporting module.


The post Integration Testing in an Enterprise DevOps Environment appeared first on Plutora.

Read the original blog entry...

More Stories By Plutora Blog

Plutora provides Enterprise Release and Test Environment Management SaaS solutions aligning process, technology, and information to solve release orchestration challenges for the enterprise.

Plutora’s SaaS solution enables organizations to model release management and test environment management activities as a bridge between agile project teams and an enterprise’s ITSM initiatives. Using Plutora, you can orchestrate parallel releases from several independent DevOps groups all while giving your executives as well as change management specialists insight into overall risk.

Supporting the largest releases for the largest organizations throughout North America, EMEA, and Asia Pacific, Plutora provides proof that large companies can adopt DevOps while managing the risks that come with wider adoption of self-service and agile software development in the enterprise. Aligning process, technology, and information to solve increasingly complex release orchestration challenges, this Gartner “Cool Vendor in IT DevOps” upgrades the enterprise release management from spreadsheets, meetings, and email to an integrated dashboard giving release managers insight and control over large software releases.

Latest Stories
Lori MacVittie is a subject matter expert on emerging technology responsible for outbound evangelism across F5's entire product suite. MacVittie has extensive development and technical architecture experience in both high-tech and enterprise organizations, in addition to network and systems administration expertise. Prior to joining F5, MacVittie was an award-winning technology editor at Network Computing Magazine where she evaluated and tested application-focused technologies including app secu...
CloudEXPO New York 2018, colocated with DevOpsSUMMIT and DXWorldEXPO New York 2018 will be held November 12-13, 2018, in New York City and will bring together Cloud Computing, FinTech and Blockchain, Digital Transformation, Big Data, Internet of Things, DevOps, AI and Machine Learning to one location.
CloudEXPO | DevOpsSUMMIT | DXWorldEXPO are the world's most influential, independent events where Cloud Computing was coined and where technology buyers and vendors meet to experience and discuss the big picture of Digital Transformation and all of the strategies, tactics, and tools they need to realize their goals. Sponsors of DXWorldEXPO | CloudEXPO benefit from unmatched branding, profile building and lead generation opportunities.
ICC is a computer systems integrator and server manufacturing company focused on developing products and product appliances to meet a wide range of computational needs for many industries. Their solutions provide benefits across many environments, such as datacenter deployment, HPC, workstations, storage networks and standalone server installations. ICC has been in business for over 23 years and their phenomenal range of clients include multinational corporations, universities, and small busines...
This sixteen (16) hour course provides an introduction to DevOps, the cultural and professional movement that stresses communication, collaboration, integration and automation in order to improve the flow of work between software developers and IT operations professionals. Improved workflows will result in an improved ability to design, develop, deploy and operate software and services faster.
Headquartered in Plainsboro, NJ, Synametrics Technologies has provided IT professionals and computer systems developers since 1997. Based on the success of their initial product offerings (WinSQL and DeltaCopy), the company continues to create and hone innovative products that help its customers get more from their computer applications, databases and infrastructure. To date, over one million users around the world have chosen Synametrics solutions to help power their accelerated business or per...
All in Mobile is a place where we continually maximize their impact by fostering understanding, empathy, insights, creativity and joy. They believe that a truly useful and desirable mobile app doesn't need the brightest idea or the most advanced technology. A great product begins with understanding people. It's easy to think that customers will love your app, but can you justify it? They make sure your final app is something that users truly want and need. The only way to do this is by ...
Authorization of web applications developed in the cloud is a fundamental problem for security, yet companies often build solutions from scratch, which is error prone and impedes time to market. This talk shows developers how they can (instead) build on-top of community-owned projects and frameworks for better security.Whether you build software for enterprises, mobile, or internal microservices, security is important. Standards like SAML, OIDC, and SPIFFE help you solve identity and authenticat...
The digital transformation is real! To adapt, IT professionals need to transform their own skillset to become more multi-dimensional by gaining both depth and breadth of a wide variety of knowledge and competencies. Historically, while IT has been built on a foundation of specialty (or "I" shaped) silos, the DevOps principle of "shifting left" is opening up opportunities for developers, operational staff, security and others to grow their skills portfolio, advance their careers and become "T"-sh...
Digital Transformation and Disruption, Amazon Style - What You Can Learn. Chris Kocher is a co-founder of Grey Heron, a management and strategic marketing consulting firm. He has 25+ years in both strategic and hands-on operating experience helping executives and investors build revenues and shareholder value. He has consulted with over 130 companies on innovating with new business models, product strategies and monetization. Chris has held management positions at HP and Symantec in addition to ...
Whenever a new technology hits the high points of hype, everyone starts talking about it like it will solve all their business problems. Blockchain is one of those technologies. According to Gartner's latest report on the hype cycle of emerging technologies, blockchain has just passed the peak of their hype cycle curve. If you read the news articles about it, one would think it has taken over the technology world. No disruptive technology is without its challenges and potential impediments t...
Hackers took three days to identify and exploit a known vulnerability in Equifax’s web applications. I will share new data that reveals why three days (at most) is the new normal for DevSecOps teams to move new business /security requirements from design into production. This session aims to enlighten DevOps teams, security and development professionals by sharing results from the 4th annual State of the Software Supply Chain Report -- a blend of public and proprietary data with expert researc...
Dynatrace is an application performance management software company with products for the information technology departments and digital business owners of medium and large businesses. Building the Future of Monitoring with Artificial Intelligence. Today we can collect lots and lots of performance data. We build beautiful dashboards and even have fancy query languages to access and transform the data. Still performance data is a secret language only a couple of people understand. The more busine...
Having been in the web hosting industry since 2002, dhosting has gained a great deal of experience while working on a wide range of projects. This experience has enabled the company to develop our amazing new product, which they are now excited to present! Among dHosting's greatest achievements, they can include the development of their own hosting panel, the building of their fully redundant server system, and the creation of dhHosting's unique product, Dynamic Edge.
This session will provide an introduction to Cloud driven quality and transformation and highlight the key features that comprise it. A perspective on the cloud transformation lifecycle, transformation levers, and transformation framework will be shared. At Cognizant, we have developed a transformation strategy to enable the migration of business critical workloads to cloud environments. The strategy encompasses a set of transformation levers across the cloud transformation lifecycle to enhance ...